Detail 01
Passive operation
No external power is required.
Product detailSKU #1500000473657
Walrus AudioCanvas Nano Line Isolator
1/7
Independent shopping perspective
The Korena take
Canvas Nano is a passive, single-channel line isolator for sending an unbalanced 1/4-inch TS signal to a balanced male XLR output. Its custom-wound transformer provides output isolation and low THD across a 20 Hz–20 kHz response. The ground lift disconnects XLR ground when a ground loop is the source of hum. At 3.74 × 1.33 × 1.69 inches, its metal chassis takes little board space, making it a focused routing tool for compact pedalboards and fly rigs.
Strong match
Who this is for
- Compact pedalboards or fly rigs needing one unbalanced 1/4-inch signal routed to a balanced XLR output.
- Sending an amp-in-a-box, active acoustic guitar, or bass-direct signal to a mixer or recording interface.
- Tight layouts where a ground-lift control and transformer-isolated output are needed.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
One 1/4-inch TS input and one male XLR output
It handles one unbalanced input signal and sends it to a balanced XLR connection.
Detail 03
Ground lift
It disconnects XLR ground to eliminate hum or ground loops.
Detail 04
3.74 × 1.33 × 1.69 inches
The compact enclosure is sized for pedalboard or fly-rig placement.
Final check
Know before you order
- 01Canvas Nano has one input and one balanced XLR output, so it is a single-channel unit.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does Canvas Nano need a power supply?
No. It is passive and needs no external power.
02What connections does it use?
It has one unbalanced 1/4-inch TS input and one transformer-isolated balanced male XLR output.
03What does the ground lift do?
It disconnects XLR ground to eliminate hum or ground loops.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Impedance
- DI – 10 kohm input, 600 ohm output; LI – 600Ω input, 600 ohm output
- Frequency Response
- 20Hz–20kHz
2 detailsBody & build
- Body Finish
- Lightly textured matte black enclosure with multicolor ink (blue, light green, yellow, orange, red, and white)
- Finish
- Lightly textured matte black enclosure with multicolor ink (blue, light green, yellow, orange, red, and white)
4 detailsConnections & power
- Output Isolation
- Transformer-isolated balanced output
- Power Requirements
- Passive (no external power required)
- Output
- 1 × XLR male (balanced)
- Input
- 1 × 1/4 inch TS (unbalanced)
1 detailsSize & weight
- Dimensions
- 3.74 inch × 1.33 inch × 1.69 inch (95 × 34 × 43 mm)
5 detailsOther
- Transformer
- Custom-wound
- Device Type
- Passive line isolator (LI) box
- Ground Lift
- Disconnects XLR ground to eliminate hum or ground loops
- Thd
- Low total harmonic distortion via custom-wound transformers
- Enclosure
- Compact, pedal-sized metal chassis
