Detail 01
Isolated outputs
Each output has its own transformer winding, so ground loop hum between pedals is eliminated rather than reduced.
Product detailSKU #1273887996415
Voodoo LabPedal Power 2 PLUS Power Supply
1/6
Independent shopping perspective
The Korena take
Eight-output isolated pedal power supply with switchable voltages and higher-current outputs. For medium to large boards mixing analog and digital pedals.
Strong match
Who this is for
- Boards mixing 9V analog pedals with digital units
- Killing hum caused by daisy-chained power
- Running a pedal that needs 12V or 18V
Consider the trade-offs
When to look elsewhere
- Two or three pedal boards — cheaper options cover that
- Very high-draw digital pedals beyond the per-output rating
- Anyone wanting a slim supply that mounts flat under a board
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
8 outputs
Fits most working boards. Add doubler cables for low-draw pedals if you outgrow the count.
Detail 03
Switchable voltage outputs
Set specific outputs to 9V, 12V or 18V so vintage-spec and higher-headroom pedals run correctly.
Detail 04
Higher-current outputs
Two outputs handle digital delays and multi-effects that starve on standard 100mA outputs.
Detail 05
Transformer-based, not switching
Heavier and warmer than switch-mode supplies, but no high-frequency switching noise near your pickups.
Final check
Know before you order
- 01Check each pedal's mA draw and voltage before assigning outputs
- 02Voltage switches are on the unit — set them before plugging anything in
- 03Mounting brackets and cables vary by package; confirm what your seller includes
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this fix my pedalboard hum?
If the hum comes from a daisy chain sharing a ground, yes. Isolated outputs break ground loops. Hum from bad cables or bad grounding in the room won't change.
02Can I run more than eight pedals?
Yes, with doubler cables on low-draw analog pedals. Just keep the combined draw under each output's rating.
03Does it handle 18V pedals?
Yes. Specific outputs switch to 18V for pedals that want the extra headroom.
04Is it quiet with high-gain amps?
The isolated, transformer-based design avoids the switching noise cheaper supplies inject. Position it away from pickups to avoid magnetic hum.
