Detail 01
Matched small-diaphragm condenser pair
The two microphones are intended to work together for stereo recording arrangements.
Product detailSKU #1500000375332
Universal AudioSP-1 Standard Pencil Microphone - Matched Pair
Sale
1/16
Independent shopping perspective
The Korena take
Built as a matched pair of small-diaphragm condensers, the SP-1 set is geared toward stereo microphone placement as well as individual recording duties. Cardioid pickup, a 20Hz–20kHz range, and a 142dB SPL maximum give it a clear studio-oriented foundation for sources including acoustic guitar, drum overheads, vocals, amplifiers, and percussion. Hemisphere modeling software expands the available response options, while Apollo presets streamline work within UA’s Apollo interface ecosystem.
Strong match
Who this is for
- X/Y or spaced stereo setups on acoustic instruments, percussion, horns, and live recordings.
- Recording loud sources such as drums and amplifiers within the stated 142dB SPL maximum.
- Apollo-based studio sessions using the available custom presets.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Cardioid polar pattern
Supports the pair’s stated use in X/Y and spaced stereo configurations.
Detail 03
48 VDC phantom power
The microphones require 48 VDC phantom power.
Detail 04
3-pin XLRM output connector
Each microphone uses a 3-pin XLRM output connection.
Detail 05
142dB SPL maximum, 1% THD
The pair is specified to handle high sound-pressure levels, including drums and amplifiers.
Final check
Know before you order
- 01Confirm that your recording setup can provide 48 VDC phantom power.
- 02Apollo-specific presets apply to UA Apollo interface workflows.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Are these microphones sold as a matched set?
Yes. The SP-1 is a matched pair of small-diaphragm condenser microphones.
02Can the pair be used for stereo recording?
Yes. X/Y and spaced configurations are identified for stereo recording.
03What software is included?
Hemisphere modeling software is included, with controls for proximity effect, axis, and filtering.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsSound
- Recommended Load Impedance
- Greater than 2 kohms
- Frequency Range
- 20Hz–20kHz
- Polar Pattern
- Cardioid
- Sensitivity
- -38 (12.6 mV) ref 1V at 1 Pa, 1kHz
1 detailsBody & build
- Color
- Matched Pair
3 detailsConnections & power
- Output Impedance
- 200 ohms
- Output Connector
- 3-pin XLRM
- Phantom Power Requirements
- 48 VDC
2 detailsSize & weight
- Weight
- 0.28
- Dimensions
- 5 inch (128 mm) length, .93 inch (23.5 mm) diameter
2 detailsOther
- Microphone Type
- Matched small-diaphragm condenser pair
- Maximum SPL
- 142dB SPL, 1% THD
