Detail 01
44.1 to 96 kHz sample-rate support
Allows operation across the listed sample-rate range.
Product detailSKU #1500000457542
Universal AudioApollo e2m Stereo Headphone Amplifier and Line Interface (Dante)
1/8
Independent shopping perspective
The Korena take
Apollo e2m is a Dante-connected stereo headphone amplifier and line interface that can serve as a monitoring and I/O point in a professional network. It offers both 1/4-inch and 1/8-inch headphone connections through a shared analog volume control, with separate mute controls for headphone and line outputs. Stereo line inputs and outputs expand what can connect at that location. Power-over-Ethernet reduces the cabling needed there, and the threaded mic-stand mount supports on-stage or studio placement.
Strong match
Who this is for
- Personal foldback monitoring on a Dante network with either 1/4-inch or 1/8-inch headphone connections.
- Adding stereo line input and output at a stage position or networked studio workspace.
- Mic-stand-mounted monitoring and I/O positions where Power-over-Ethernet can reduce local cabling.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
120 dB dynamic range
States the unit's specified dynamic-range figure.
Detail 03
1 ms, 2 ms, or 5 ms configurable setting
The setting is selected in Dante Controller.
Detail 04
AES67 support at 48 kHz
AES67 operation is set in Dante Controller at 48 kHz.
Detail 05
Threaded 5/8-inch mic-stand mount
Provides a direct mounting point for a compatible mic stand.
Final check
Know before you order
- 01Use Dante Controller for the configurable 1 ms, 2 ms, or 5 ms setting, AES67 setting, and device lock.
- 02The headphone outputs share one analog volume control.
- 03Line and headphone outputs have separate mute controls.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Which headphone plugs can connect to the e2m?
It has stereo 1/4-inch and 1/8-inch headphone outputs.
02Does it provide line I/O?
Yes. The e2m includes stereo line inputs and stereo line outputs.
03Can it mount on a mic stand?
Yes. It has a threaded 5/8-inch mic-stand mount.
04How is the e2m powered?
It uses Power-over-Ethernet, specified at 7 W maximum and 5 W typical.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsConnections & power
- Sample Rate Support
- 44.1 to 96kHz
- Power Over Ethernet Poe
- 7W (5W typical)
- Aes67 Support
- 48kHz (set in Dante Controller)
7 detailsOther
- Mounting
- Threaded 5/8 inch mic stand mount
- Thd N Headphone
- -112dB
- Dynamic Range
- 120dB
- Thd N
- -115dB
- Thd N Line Out
- -109dB
- Dante Device Lock
- Configurable in Dante Controller
- Configurable
- 1 ms, 2 ms, or 5 ms (set in Dante Controller)
