Detail 01
24-bit / 192kHz conversion
Supports recording at up to 24-bit, 192kHz resolution.
Product detailSKU #1500000382708
Universal AudioVolt 476P USB-C Audio Interface
1/7
Independent shopping perspective
The Korena take
Volt 476P is a four-input, four-output USB-C recording hub for tracking microphones, instruments, line-level sources, synths, and stereo material. Its Vintage preamp mode and built-in analog compressor let you shape input signals before recording, while direct monitoring keeps the monitored signal immediate during takes. It runs from USB bus power and combines 24-bit/192kHz conversion, two stereo headphone outputs, MIDI I/O, and bundled LUNA software, UAD plug-ins, and virtual instruments in a compact metal chassis.
Strong match
Who this is for
- Recording vocals, guitars, keys, synths, and stereo sources through one desktop or mobile USB-C rig.
- Tracking expressive performances with direct monitoring and front-end compression for real-time level management.
- Connecting MIDI controllers, drum machines, or synths alongside audio sources.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Vintage preamp mode and analog compressor
Offers input-stage character and real-time dynamic control before recording.
Detail 03
Two stereo headphone outputs
Provides two headphone monitoring connections.
Detail 04
USB bus powered
The interface draws operating power through its USB connection.
Detail 05
1 × MIDI In and 1 × MIDI Out
Provides 5-pin DIN MIDI connections for compatible controllers and hardware.
Final check
Know before you order
- 01A USB 2.0-or-higher port is required.
- 02Software download requires internet access.
- 03Supported systems are macOS Catalina 10.15 or later, Windows 10 or 11 64-bit, and iOS 14 or later.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I monitor while recording without delay?
Yes. Volt 476P provides real-time direct monitoring.
02How many inputs and outputs does it have?
It has four inputs and four outputs.
03What software comes with Volt 476P?
It includes LUNA, UAD plug-ins, and virtual instruments; an internet connection is required for the download.
04Does it offer MIDI connections?
Yes. It has one 5-pin DIN MIDI input and one 5-pin DIN MIDI output.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 20Hz–20kHz ±0.1dB
14 detailsConnections & power
- USB
- USB 2.0 or higher port
- Equivalent Input Noise
- -127dBu
- Phantom Power
- +48V switchable
- Headphone Output
- Two stereo
- MIDI
- 1 × MIDI In, 1 × MIDI Out (5-pin DIN)
- Connector Type
- 1/4 inch TRS balanced or TS unbalanced
- Power Source
- USB bus powered
- Input Impedance
- 15 kohm
- Output Impedance
- 100 ohm
- Line Outputs
- 2 × 1/4 inch TRS balanced or TS unbalanced
- Maximum Output Level
- +15dBu
- Monitor Outputs
- 2 × 1/4 inch TRS (stereo pair)
- Maximum Input Level
- +22dBu
- Supported Sample Rates KHZ
- 44.1, 48, 88.2, 96, 176.4, 192
3 detailsSize & weight
- Equivalent Input Noise 150 Ohms A Weighted
- -127dBu
- Bit Depth
- 24-bit
- Dynamic Range A Weighted
- 110dB
16 detailsOther
- Headphones
- 2 × 1/4 inch TRS
- Thd N
- -102.5dB (0.00075%)
- Ios
- iOS 14 or later
- Thd Noise 1khz 1dbfs
- -102.5dB (0.00075%)
- Model
- Volt 476P
- Connection
- 2 × 1/4 inch TRS stereo
- Macos
- Catalina 10.15 or later
- Gain Range
- 55dB
- Dynamic Range
- 110dB
- Windows
- Windows 10 or 11 (64-bit)
- Processor
- Intel, AMD or Apple Silicon
- Sample Rates
- 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
- Product Type
- USB audio interface
- Channels
- 4 × 1/4 inch TRS balanced or TS unbalanced
- Available Gain
- 55dB
- Internet
- Required for software download
