Detail 01
8-ohm version
Choose the version that matches your amplifier.
Product detailSKU #1500000278737
Two Notes AUDIO ENGINEERINGTorpedo Captor Loadbox/Attenuator/DI Black 8 Ohm
metalprogressive metaldjent
1/8
Independent shopping perspective
The Korena take
Put the 8-ohm Torpedo Captor between an amp head and speaker cabinet to send a balanced DI signal with optional speaker simulation while continuing to use the amp as normal. Its reactive loadbox also lets the amp operate without a cabinet for silent playing, and the ATT output applies a fixed -20 dB reduction when a cabinet remains connected. For recording, it connects an amplifier directly to an audio interface or mic preamp; 48V phantom power can run the unit on stage.
Strong match
Who this is for
- Sending a speaker-simulated guitar or bass amp signal directly to front of house.
- Recording an amplifier directly into an audio interface or mic preamp.
- Playing an amp without a speaker cabinet for silent home sessions.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
100W RMS admissible power
The unit is rated for 100W RMS admissible power.
Detail 03
Speaker ATT output: -20 dB
Provides a fixed -20 dB attenuated speaker output.
Detail 04
Balanced XLR DI output
Delivers a DI signal with or without speaker simulation.
Detail 05
Speaker THRU output
Connects directly to the speaker input and disconnects the loadbox when used.
Final check
Know before you order
- 01Match the 8-ohm version to your amplifier.
- 02For the 16 Wall of Sound virtual cabinets, register the product and install the Wall of Sound plugin.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I play without a speaker cabinet?
Yes. Its internal 100W reactive loadbox allows amplifier use without a speaker cabinet for silent playing.
02Can it feed a PA directly?
Yes. The balanced XLR DI output can provide a signal with speaker simulation for front of house.
03Does it need a separate stage power supply?
It can be powered by 48V phantom power.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Speaker Att
- 1/4 inch Jack unbalanced (TS) – Attenuation: -20dB.
- Speaker Thru
- 1/4 inch Jack unbalanced (TS) – Directly connected to Speaker Input. Disconnects the loadbox when used.
1 detailsBody & build
- Color
- Black
5 detailsConnections & power
- Input Impedance
- 4, 8 or 16 Ohms
- Admissible Power
- 100W RMS
- Line Output
- 1/4 inch Jack balanced (TRS) – Impedance: approx 1 kOhms – Without speaker simulation
- Speaker Input
- 1/4 inch Jack unbalanced (TS, Tip/Sleeve)
- DI Output
- XLR balanced – Impedance: 600 Ohms – With or without speaker simulation
2 detailsSize & weight
- Weight
- 2.2
- Dimensions
- 6.89 inch x 4.9 inch x 2.44 inch (175 x 126 x 62 mm)
2 detailsOther
- Current
- 5mA
- Cooled By Fan Thermal Security
- the amp and musician work in security.
