Detail 01
4/4 size
Cut for full-size violin string length. On a smaller instrument the winding lands wrong and pitch stability suffers.
Product detailSKU #1274115037490
ThomastikDominant 4/4 Size Violin Strings 4/4 Set, Wound E String, Ball End
Independent shopping perspective
The Korena take
A full four-string Thomastik Dominant set for full-size violin, with a wound ball-end E. For players ready to move past factory strings.
Strong match
Who this is for
- Full-size violins getting their first real string change
- Players who find plain steel E strings shrill
- Replacing a worn set all at once for even response
Consider the trade-offs
When to look elsewhere
- Fractional violins — 3/4, 1/2 and smaller need their own sets
- Players wanting the brightest, most cutting top string
- Anyone needing to replace just one broken string
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Wound E
Metal winding over the core instead of bare steel. Less whistling on string crossings, warmer and less edgy up high.
Detail 03
Ball end
Ends in a small ball, not a wire loop. Your tailpiece or E adjuster has to accept a ball.
Detail 04
Complete set
All four strings from one line, so tension and feel match across the bridge instead of one string dominating.
Detail 05
$92.50 for four
Roughly $23 a string. Cheaper per string than buying singles, but a full-set purchase each time.
Detail 06
Medium tension
Standard pull for most violins. Bow pressure and response sit where a shop setup expects them.
Final check
Know before you order
- 01Change one string at a time so the bridge and soundpost stay seated
- 02Expect several days of stretching and daily retuning before pitch holds
- 03Check your E fine tuner accepts a ball end, not a loop
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will these fit a 3/4 violin?
No. These are cut for 4/4 full-size violin. A 3/4 instrument needs 3/4 strings — the wrong length changes tension and the winding will sit past the nut or bridge.
02What's the difference between a wound E and a plain E?
A wound E has metal wrapped over the core. It sounds warmer and whistles less on string crossings. A plain steel E is brighter and cuts more.
03How long do they last?
It depends on playing hours, sweat and rosin buildup. Most players replace when the sound goes dull, tuning gets unstable, or the winding starts unraveling at contact points.
04Can I install these myself?
Yes, with care. Replace one string at a time so the bridge stays upright and the soundpost stays standing. Keep the bridge vertical as tension comes up.
