Detail 01
32 mm length
Length must match your lug depth. Too short won't catch threads; too long bottoms out before the head tensions.
Product detailSKU #1274115042182
TAMATension Bolt for Toms and Snares 2-Pack 32 mm
Independent shopping perspective
The Korena take
Two 32 mm tension bolts for TAMA toms and snares. Replacement hardware for stripped, bent, or lost lugs.
Strong match
Who this is for
- Replacing a stripped or cross-threaded bolt mid-session
- Keeping spares in a stick bag for gigs
- Restoring a used TAMA kit with missing hardware
Consider the trade-offs
When to look elsewhere
- Drums from other brands with different thread pitch
- Anyone needing a full set — two bolts won't re-hardware a drum
- Bass drum hoops, which typically use longer bolts
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
2-pack
Enough for one or two failed bolts. A full snare typically needs eight to ten per side.
Detail 03
For toms and snares
Sized for standard tom and snare lugs, not bass drum claws or floor tom leg brackets.
Detail 04
TAMA-specific
Thread pitch and head shape are matched to TAMA lugs — cross-brand fit is not a given.
Final check
Know before you order
- 01Measure your existing bolt before ordering; lug depth varies across drum sizes
- 02Washers are a separate item — reuse yours or buy them
- 03Replacing one bolt often means retuning that whole head
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many bolts does a snare drum need?
Typically eight to ten per head, so sixteen to twenty per drum. This pack covers replacements, not a full re-hardware.
02Will these fit my non-TAMA drum?
Not reliably. Thread pitch and bolt head size vary between manufacturers. Check against a bolt you already own.
03Are washers included?
No. Reuse the washers from the old bolts, or buy new ones — running bolts without washers chews up the hoop.
04How do I know if 32 mm is right?
Pull one bolt from the drum and measure the threaded shaft. Deeper lugs on larger toms often take longer bolts.
