Detail 01
10 in. sizing
Drilled and curved for a 10-inch shell. Bolt spacing and shell curvature will not match other diameters.
Product detailSKU #1274115064866
Sound Percussion LabsSPD16 Standard Tom Bracket 10 in.
Independent shopping perspective
The Korena take
A 10-inch tom mounting bracket. Hardware for attaching a tom to a stand or a bass drum mount on a budget kit.
Strong match
Who this is for
- Replacing a cracked or stripped tom bracket on a starter kit
- Mounting a 10-inch tom on an existing stand
- Keeping a spare bracket for kits assembled and torn down often
Consider the trade-offs
When to look elsewhere
- Toms of other diameters, where lug spacing will not line up
- Kits using suspension mounts that isolate the shell
- Anyone wanting isolation hardware to open up tom sustain
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Standard bracket
Bolts directly to the shell rather than floating it. Contact with the shell reduces sustain compared to suspension mounts.
Detail 03
Tom bracket
The shell-side half of the mount. It receives the tom arm from a stand or bass drum mount.
Detail 04
Budget tier
Functional replacement hardware. Sized for entry-level kits rather than an upgrade for a pro shell.
Final check
Know before you order
- 01Verify your existing shell hole spacing matches before drilling anything new
- 02Tom arm, stand and bass drum mount are not included
- 03Mounting bolts, washers and gaskets may need to be reused from your old bracket
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this fit a 12-inch tom?
No. The bracket is curved and drilled for a 10-inch shell. On a larger diameter it will not sit flush and the holes will not align.
02Does this include the tom arm?
No. This is the bracket that mounts to the drum shell. The arm comes from your stand or bass drum mount.
03Will this work with my existing shell holes?
Only if the hole spacing matches. Compare the bracket's bolt pattern to your shell before removing the old hardware.
04Does mounting hardware affect tom sound?
Yes. A bracket bolted flat to the shell damps vibration slightly, which shortens sustain compared to a suspension mount.
