Detail 01
Quarter-inch pole pieces
Larger magnets read a wider slice of the string. Result is more output and thicker low end than a standard single coil.

Independent shopping perspective
High-output Strat-style single coil with oversized pole pieces and flat tops. For players who want single-coil bite with real low end behind it.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Larger magnets read a wider slice of the string. Result is more output and thicker low end than a standard single coil.
Detail 02
Even string-to-string level across flat-radius necks. Staggered poles are set up for vintage 7.25-inch radius boards.
Detail 03
Reverse wound, reverse polarity. Paired with a standard pickup it hum-cancels in the in-between switch positions.
Detail 04
Pushes an amp harder and compresses more. You lose some of the glassy top-end sparkle in the trade.
Detail 05
Drops into a standard Strat-style route. Will not fill a humbucker cavity without a pickguard or ring.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
It is a reverse-wound, reverse-polarity unit, typically used as the middle pickup so combined positions hum-cancel. Check the polarity of your other pickups before ordering.
Yes. It is a true single coil, so it hums when used alone. Hum cancellation only happens when combined with an opposite-polarity pickup.
Flat poles give even output on modern flat-radius fretboards. Staggered poles are designed for vintage 7.25-inch radius necks and can sound uneven on flatter boards.
Yes, noticeably. The oversized poles produce more output and a fuller low end, which drives an amp harder but trades away some vintage sparkle.