Detail 01
Quarter Pound pole pieces
Oversized poles widen the magnetic field, raising output and low end well above a standard-diameter single-coil.

Independent shopping perspective
A hot-wound single-coil in standard Strat size, for players who want more push and low end from a stock-sounding pickup without moving to humbuckers.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Oversized poles widen the magnetic field, raising output and low end well above a standard-diameter single-coil.
Detail 02
Poles sit level instead of staggered, which evens string-to-string volume on flatter modern fingerboard radii.
Detail 03
Drops into an existing Strat-style pickguard rout. No routing, no new mounting rings, no body work.
Detail 04
Covers a single position. A full three-position swap means buying three and rewiring the whole harness.
Detail 05
About the cost of one mid-tier pickup, so a single-position upgrade is the cheap way to change a guitar's voice.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Yes, if the guitar takes standard single-coil pickups. It mounts to the pickguard in an existing rout. No body routing or new hardware needed.
It is a single coil, so it picks up mains hum like any other. Position 2 and 4 on a Strat switch will still hum-cancel if paired with a reverse-wound middle pickup.
Flat suits flatter modern fingerboard radii, where staggered poles would leave the middle strings louder. Staggered suits vintage-radius necks.
Yes, though output is high for the neck. Set it lower than you would a standard single coil to keep string balance and avoid magnet pull.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.