Detail 01
Bridge position only
Voiced and wound for the bridge, where string movement is smallest. Installing it at the neck would sound thick and overloaded.
Product detailSKU #1274034493588
Seymour DuncanSH-4 JB Model Bridge Humbucker Pickup Black
1/2
Independent shopping perspective
The Korena take
The bridge half of the Hot Rodded set sold alone. A hot-output humbucker for players who want more push and sustain from the bridge position.
Strong match
Who this is for
- Upgrading only the bridge pickup and leaving the neck alone
- Rock leads that need to cut through a loud band mix
- Driving a tube amp into breakup without a boost pedal
Consider the trade-offs
When to look elsewhere
- Players wanting clean, vintage-output PAF character
- Jazz and low-gain work where clarity matters more than push
- Anyone needing a neck pickup; this is a bridge model only
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
High output for a humbucker
Hits the amp input harder, so the amp distorts sooner. Less headroom for pristine cleans than a vintage-wind pickup.
Detail 03
Humbucking two-coil design
Cancels 60-cycle hum. Quiet near stage lighting and computer monitors where single coils buzz.
Detail 04
Black open coils
No metal cover. Uncovered coils sound slightly brighter and more open than the same pickup under a cover.
Detail 05
Sold individually
Half the cost of the two-pickup set. Sensible if your neck pickup already works and only the bridge disappoints.
Final check
Know before you order
- 01Pickup only. No pots, mounting ring, screws, springs or output jack wiring included
- 02Soldering required; four-conductor wiring means more leads to sort than a vintage two-wire pickup
- 03Check bridge string spacing against your bridge before ordering, especially on wide-spaced hardtails
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is this the same JB from the Hot Rodded set?
Yes. The Hot Rodded set pairs this SH-4 JB bridge pickup with the SH-2 Jazz neck pickup. Buying this alone covers just the bridge position.
02Will it fit a standard humbucker rout?
It is a standard-size humbucker and fits standard routs and mounting rings. Confirm your bridge string spacing, since wide-spaced bridges can misalign the pole pieces.
03Do I need a new volume pot?
No. It works with the 500k pots common in humbucker-equipped guitars. Guitars wired with 250k pots will sound noticeably darker.
04Can I use this in the neck position?
Physically it will mount, but it is wound for the bridge. At the neck it sounds thick and loses definition, particularly under distortion.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
