Detail 01
6 m cable
Allows six metres between the microphone connection and the Apple device.
Product detailSKU #1500000280564
SaramonicLC-XLR Cable Interface With XLR-F to Apple Lightning
1/8
Independent shopping perspective
The Korena take
LC-XLR places a female XLR microphone connection at the Lightning port of an iPhone, iPad, or iPod Touch for recording or broadcasting. Connect a dynamic XLR microphone—or a battery-powered condenser microphone—then plug it into the Apple device; there are no controls or settings to manage. Its integrated analog-to-digital converter and MFi-certified Lightning connector create the digital connection. A locking XLR socket helps prevent accidental disconnects, while the 6 m cable gives the microphone and device room to be positioned apart. A hook-and-loop wrap is included for cable management.
Strong match
Who this is for
- Recording or broadcasting to an Apple Lightning device with a dynamic XLR microphone.
- Using a battery-powered condenser microphone with an iPhone, iPad, or iPod Touch.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Locking female XLR connector
Helps prevent the microphone from being accidentally unplugged.
Detail 03
Apple MFi Certified Lightning connector
Connects the interface to the Lightning port on the Apple device.
Detail 04
Hook-and-loop cable wrap included
Keeps the cable tidy when it is not in use.
Final check
Know before you order
- 01The microphone connection is female XLR.
- 02Condenser microphone use is specified for battery-powered models.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Do I need to adjust settings before recording?
No. Connect the XLR microphone, plug the cable into the Apple device, and begin recording or broadcasting.
02Which microphones can I use?
Any dynamic XLR microphone can be used. Battery-powered condenser microphones can also be used.
03Does it require separate power?
No. The LC-XLR is powered by the connected iOS device.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Frequency Response
- 20Hz–20kHz
- Sampling Frequency
- 44.1kHz/48kHz
2 detailsConnections & power
- Audio Output Connector
- Apple MFi Certified Lightning Connector
- Power Requirements
- Supplied by iOS Devices
6 detailsSize & weight
- Product Height
- 1.5 cm
- Cable Length
- 19.7’ (6 m)
- Product Weight
- .109 kg
- Product Width
- 1.5 cm
- Weight
- 4.86
- Product Length
- 300 cm
3 detailsOther
- Signal to Noise Ratio
- Less than –76dB
- Bitrate
- 16-bit/24-bit
- Gain
- 35dB
