Detail 01
Up to 328-foot (100 m) operating range
Supports wider shots while keeping the transmitter and receiver connected wirelessly.
Product detailSKU #1500000337631
SaramonicBlink 500 PRO B1 Ultra-Compact Wireless Clip-On Microphone System
1/10
Independent shopping perspective
The Korena take
Blink 500 PRO B1 is a single-transmitter 2.4 GHz wireless kit for sending audio to cameras, mobile devices, and other gear with compatible connections. The transmitter has its own omnidirectional mic and accepts the included lavalier for a more discreet placement. Its dual-channel receiver supplies TRS and TRRS leads, headphone monitoring, and mono or stereo output. The included charging carry case protects the system in transit and provides rechargeable power when working away from a charger.
Strong match
Who this is for
- Recording a single on-camera presenter with the clip-on transmitter or supplied lavalier microphone.
- Monitoring a camera or mobile-device recording through the receiver’s level-controlled headphone output.
- Expanding later to two microphones by adding a second Blink 500 PRO transmitter.
Consider the trade-offs
When to look elsewhere
- Phones and tablets without a 3.5 mm input; they need a Lightning or USB-C dongle.
- Two-person wireless capture from this B1 kit alone; it comes with one transmitter.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Approximately eight-hour battery life
Provides extended recording time before recharge.
Detail 03
1200 mAh charging carry case
Stores, protects, and recharges the system for transport and remote work.
Detail 04
3.5 mm mic/line input with plug-in power
The transmitter can accept microphone-level or line-level sources.
Detail 05
Mono/stereo receiver output
With an additional transmitter, stereo mode can place each microphone on a separate camera or recorder channel.
Detail 06
3.5 mm headphone output with level control
Enables real-time monitoring even when the recording device has no headphone output.
Final check
Know before you order
- 01Mobile devices without a 3.5 mm input require a Lightning or USB-C dongle, sold separately.
- 02A second Blink 500 PRO TX transmitter is sold separately for two-person wireless use.
- 03External 3.5 mm microphones need standard TRS pin-out wiring.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What comes with the Blink 500 PRO B1 system?
It includes one clip-on transmitter with built-in mic, an omnidirectional lavalier, a dual-channel receiver, TRS and TRRS output cables, and a charging carry case.
02Can I record two people with this system?
Yes, after adding a second Blink 500 PRO TX transmitter, sold separately. The receiver supports two transmitters and mono or stereo output.
03Will it connect to a phone without a headphone jack?
It can connect when paired with a Lightning or USB-C dongle, which is not included.
04Can the transmitter accept line-level audio?
Yes. Its 3.5 mm input can transmit microphone-level or line-level sources wirelessly.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsSound
- Built in Microphone Sensitivity
- -39dB
- Rf Frequency Band
- 2400 to 2483.5 MHz
- Lavalier Microphone Sensitivity
- -39dB
- Voice Delay
- ≤6ms
10 detailsConnections & power
- Power Capacity
- 1200mAh
- Battery Life
- Approximately 8-hours
- Reference Audio Input Level
- -30~-42dBv MIC input, 0dB Attenuation
- Rf Output Power
- 10mW
- Line Output Connector
- 3.5mm
- Output Mode Types
- Mono / Stereo
- Power Requirements
- Powered by USB-C port to USB-A Charger (5V/1.5A)
- Input Connector
- 3.5mm Mic In / Line In (Mic with Plug-in-Power)
- Headphone Output Connector
- 3.5mm
- Output Level
- -60dBV to -20dBV
2 detailsSize & weight
- Weight
- 1.13
- Dimensions
- 4.84 x 4.02 x 1.56” (123 x 102 × 39.7mm)
15 detailsOther
- Antenna
- PIFA Antenna
- High Contrast Oled Screen Resolution
- 128 X 64 pixels
- Modulation
- Gaussian Frequency-Shift Keying (GFSK)
- Other Functions
- Tactile Mute Function
- Signal to Noise Ratio
- ≥78dB
- Box S Charging Time
- 3-hours
- Built in Microphone Polar Pattern
- Omnidirectional
- Operating Range
- Up to 328' (100m)
- Built in Microphone Maximum SPL
- 120dB
- Storage Temperatures
- -4° to 131°F (–20°C to +55°C)"
- Reception Type
- 2.4GHz Digital Frequency
- Lavalier Microphone Maximum SPL
- 110dB
- Distortion
- ≤0.05%
- Digital Signal Resolution
- 24bit / 44.1kHz
- Operating Temperatures
- 0° to 122°F (0°C to 50°C)
