Korena
Product detailSKU #1500000266359

RoyerdBooster In-Line Signal Booster

Royer
Royer dBooster In-Line Signal Booster
1/2

Independent shopping perspective

The Korena take

Royer’s dBooster sits in the microphone signal path to raise passive low-output ribbon and dynamic microphones while buffering their impedance. Select either 12 dB or 20 dB from the front-panel switch to balance added level with available headroom. Its Class A input presents high source impedance to the microphone, and its low-impedance output can feed a digital interface directly or a standard mic preamp. It is phantom-powered and is also intended to reduce loss over long cable runs.

Royer dBooster In-Line Signal Booster product detail
Product studyRoyer dBooster In-Line Signal Booster

Strong match

Who this is for

  • Recording passive low-output ribbon or dynamic microphones into a digital interface directly
  • Selecting 12 dB or 20 dB of clean boost to balance level and headroom
  • Running a boosted microphone-level signal through long cable runs

Consider the trade-offs

When to look elsewhere

  • Microphone setups without phantom power available for this phantom-powered booster

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

12 dB / 20 dB selectable gain

A front-panel switch provides two gain settings.

Detail 02

High-impedance input and low-impedance output

The input minimizes microphone loading; the output is an increased microphone-level signal.

Final check

Know before you order

  1. 01Provide phantom power for operation.
  2. 02It is designed for passive, low-output ribbon and dynamic microphones.

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Which microphones is the dBooster designed for?

It is designed for passive low-output ribbon and dynamic microphones.

02Can it feed an audio interface directly?

Yes. Its low-impedance output can drive a digital interface directly or feed a standard microphone preamplifier.

03How much gain does it add?

Choose 12 dB or 20 dB with the front-panel switch.