Detail 01
Elastic suspension cradle
Rubber bands decouple the mic from the stand, so footsteps and desk bumps don't travel up as low thumps.
Product detailSKU #1274115056262
RODESM2 Microphone Shockmount for RODE Classic II, NTV, NT1000, NTK, NT2000 & K2 Microphones
Independent shopping perspective
The Korena take
An elastic shockmount for RODE's large-diaphragm bodies — Classic II, NTV, NT1000, NTK, NT2000, K2. Buy it to match one of those mics.
Strong match
Who this is for
- Studio vocal sessions on a stand near foot traffic or a desk
- Isolating a mic from floor thumps and desk knocks
- Replacing a worn mount on an existing RODE large-diaphragm mic
Consider the trade-offs
When to look elsewhere
- Pencil condensers or shotgun mics — the cradle is sized for larger bodies
- Non-RODE mics without checking body diameter first
- Anyone needing a boom-arm-specific clamp solution
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Fits Classic II, NTV, NT1000, NTK, NT2000, K2
Sized for those bodies specifically. Different diameters slip or sit too tight in the cradle.
Detail 03
230g weight
Adds real mass at the top of a stand. Lightweight stands may need the legs spread wider to stay stable.
Detail 04
100 x 150 x 210mm
A large footprint. Check clearance if the mic sits close to a pop filter, screen or reflection filter.
Detail 05
1 year warranty
Elastic bands are the wear item on any shockmount. Coverage matters more here than on solid hardware.
Final check
Know before you order
- 01Check your mic is on the compatibility list before ordering — fit is model-specific.
- 02Elastic bands stretch and eventually sag; treat them as a consumable.
- 03Verify your stand's thread and load rating handles the mount plus mic weight.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this fit my NT1?
The listed fits are Classic II, NTV, NT1000, NTK, NT2000 and K2. Compare your mic's body diameter to one of those before ordering.
02Does a shockmount really make a difference?
Yes, for anything transmitted through the stand — footsteps, desk bumps, floor vibration. It does nothing for airborne noise or plosives.
03Does it include a pop filter?
This is the suspension mount only. A pop filter is a separate purchase and mounts on the stand or clamps to the mount.
04What stand thread does it use?
Check the mount's thread against your stand and grab a 5/8 to 3/8 adapter if the two don't match — most stands ship with one.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
2 detailsSize & weight
- Dimensions Hxwxd
- 100 mm x 150 mm x 210 mm
- Weight
- 230
1 detailsOther
- Warranty
- 1 year
