Detail 01
BNC female connector
Uses a BNC connection for the coaxial link in the wireless setup.
Product detailSKU #1500000409080
RF VenueCP Beam Antenna Black
1/2
Independent shopping perspective
The Korena take
Designed for UHF wireless work from 470–698 MHz, the CP Beam is a circularly polarized beam antenna with up to 9 dB of gain. Release its straps, extend the antenna, then connect a coaxial cable to a receiver, transmitter, or antenna combiner. At 2.5 lb, it compresses for storage and fits in a 2RU rack drawer, making it practical to pack between wireless setups.
Strong match
Who this is for
- Packing a UHF antenna into a 2RU rack drawer for transport between wireless-system setups.
- Connecting a beam antenna to a receiver, transmitter, or antenna combiner with a coaxial run.
Consider the trade-offs
When to look elsewhere
- Setups operating outside the 470–698 MHz frequency range.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
¼-inch-20, ⅜-inch-16, or ⅝-inch-27 mount threads
Offers three listed mounting-thread options.
Detail 03
63° azimuth beam width
Defines the antenna's listed beam pattern width.
Final check
Know before you order
- 01A coaxial cable is needed for connection and is not included.
- 02Confirm that your operating frequencies fall within 470–698 MHz.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What frequency range does the CP Beam cover?
It operates from 470 to 698 MHz.
02How is it connected?
Connect a coaxial cable to a receiver, transmitter, or antenna combiner through its BNC female connector.
03Is it easy to pack?
It weighs 2.5 lb, compresses for storage, and fits in a 2RU rack drawer.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Operating Frequency
- 470 to 698 MHz
- Impedance
- 50 ohms
1 detailsConnections & power
- Connector
- BNC female
4 detailsSize & weight
- Bandwidth
- 228 MHz
- Beam Width
- Azimuth X: 63°
- Weight
- 1.1
- Dimensions
- 355 mm (14.0 inch) W x 355 mm (14.0 inch) H
10 detailsOther
- Pattern Type
- Beam
- Operating Temperature Range
- -23°C to +54°C (-9°F to +129°F)
- Gain
- Azimuth Y: 9 dB
- F B Ratio
- Azimuth X: -10 dB
- Squint
- Azimuth Y: <2 dB
- Mount Threads
- ¼"-20, ⅜"-16 or ⅝"-27
- Azimuth Y
- -12 dB
- F S Ratio
- Azimuth X: -12 dB
- Average Return Loss
- -13.15 dB
- Polarization
- RHCP
