Detail 01
24 editable SPX programs
Provides onboard reverb, delay, chorus, flanger, and other effects without adding a separate effects processor.
Product detailSKU #1418660051098
YamahaRestock Yamaha MG20XU 20-Channel Mixer With Effects
Sale
1/4
Independent shopping perspective
The Korena take
Yamaha’s MG20XU is a 20-channel analog mixer built for live sound, recording, and fixed installations that need substantial input capacity. Its D-PRE preamps provide the clean, natural starting point described for the console, while one-knob compression and three-band mono-channel EQ keep everyday dynamics and tonal adjustments direct. The onboard SPX processor supplies 24 editable effects, including reverb, delay, chorus, and flanger. Four AUX sends, four group outputs, USB audio, and flexible routing give a working rig multiple paths to organize a mix.
Strong match
Who this is for
- Live sound setups needing 20 input channels, editable effects, and multiple AUX and group paths.
- Recording work that benefits from USB Audio Class 2.0 at up to 192 kHz/24-bit.
- Permanent installations requiring an analog mixer with phantom power and dedicated monitoring outputs.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Four AUX sends and four group outputs
Offers separate send and subgroup paths for organizing a more involved mix.
Detail 03
One-knob compressor
Puts channel dynamics control in a single control rather than a multi-parameter compressor section.
Detail 04
80 Hz high-pass filter on mono channels
Adds a selectable low-frequency filter to the mono-channel control set.
Detail 05
2 x 12-segment LED meters
Gives a dedicated visual readout for output level, including peak indication.
Final check
Know before you order
- 01Confirm that 20 input channels and the console’s analog format match the number and type of sources in your setup.
- 02USB audio is specified as USB Audio Class 2.0 compliant, with support up to 192 kHz/24-bit.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many effects are available?
The onboard SPX processor includes 24 editable programs, with reverb, delay, chorus, flanger, and additional effects.
02Does it provide phantom power?
Yes. The mixer provides +48 V phantom power.
03How many AUX sends does it have?
It has four AUX sends.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsConnections & power
- Output Channels
- STEREO OUT: 2
- Phantom Power
- +48 V
- Input Channels
- 12 Mono[MIC/LINE], 4 Mono/Stereo[MIC/LINE]
15 detailsOther
- Bus
- Stereo: 1, GROUP, AUX: 4
- EQ High
- Gain: +15dB/-15dB, Frequency: 10kHz shelving
- Comp
- 1-knob compressor Threshold: +22dBu to -8dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7dB, Attack time: approx. 25 msec, Release time: approx. 300 msec
- Monitor Out
- 1
- Digital I O
- USB Audio Class 2.0 compliant, Max of 192kHz, 24-bit
- Aux Send
- 4
- Peak LED
- LED turns on when post EQ signal reaches 3dB below clipping
- Phones
- 1
- EQ Mid
- Gain: +15dB/-15dB, Frequency: 2.5kHz peaking
- Level Meter
- 2 x 12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30dB]
- Group Out
- 4
- Pad
- 26 dB (Mono)
- Onboard Processors
- SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)
- Hpf
- 80 Hz, 12 dB/oct (Mono)
- EQ Low
- Gain: +15dB/-15dB, Frequency: 100Hz shelving
