Detail 01
Batter head
This is the side you strike with the pedal. It does not replace the front head with the port hole.

Independent shopping perspective
Clear two-ply bass drum head with a built-in impact patch and inlay ring. For drummers who want a controlled, pre-dampened kick without stuffing the drum.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
This is the side you strike with the pedal. It does not replace the front head with the port hole.
Detail 02
Head size matches the drum's diameter, not the hoop. A 22-inch kick takes this; measure the shell to confirm.
Detail 03
Reinforced spot where the beater lands. Slows wear at the strike point and adds a bit of attack.
Detail 04
More attack and brightness than a coated head. Coated heads sound warmer and drier.
Detail 05
Two-ply construction with an underside inlay ring. Built-in damping controls overtones so you tune less and muffle less.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Usually less of one. The inlay ring and two plies already cut overtones. Try it bare first, then add light muffling if you want it drier.
The one you hit. It mounts on the batter side, facing the pedal.
No. Head size must match drum diameter. A 22-inch head only fits a 22-inch kick.
Clear gives more attack and a brighter click. Coated is warmer and softer. This one is clear.