Detail 01
Resonant head
The front head, not the one your beater hits. It shapes decay and low-end bloom rather than taking impact.
Product detailSKU #1274034490765
RemoCustom Graphic Flames Resonant Bass Drum 22 in.
Independent shopping perspective
The Korena take
22-inch resonant bass drum head with a printed flames graphic. Front-facing head for a kick drum, chosen for the look as much as the sound.
Strong match
Who this is for
- Stage kits where the front kick head faces the audience
- Replacing a torn or plain front head on a 22-inch kick
- Drummers who want artwork without a custom order wait
Consider the trade-offs
When to look elsewhere
- The batter side. This is the front, non-struck head
- Kick drums other than 22 inches
- Anyone who wants a plain or logo-free front head
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
22 in. size
Fits a 22-inch bass drum shell. The most common kick size, but measure before ordering.
Detail 03
Custom graphic print
Artwork is printed on the film. It faces out toward the room and shows under stage lighting.
Detail 04
No pre-cut port hole
If you mic inside the drum or want shorter sustain, you cut the hole yourself or use a port ring.
Detail 05
Bass drum head
Thicker and larger than tom heads, tensioned lower. Uses a bass drum hoop and claws, not tom lugs.
Final check
Know before you order
- 01Head only. No port hole cutter, ring, or muffling pillow included
- 02Cutting a port is permanent. Mark and measure before you cut
- 03Removing the front head means unhooking claws and the bass drum hoop
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I use this as the batter head?
No. It is built as a resonant front head. The batter side takes beater impact and needs a head made for that.
02Does it come with a hole in it?
No port hole is cut. You cut one yourself if you want to mic inside or shorten the decay.
03Will the graphic wear off?
The front head is not struck in normal playing, so the printed side stays intact under typical use.
04Does a graphic head sound different from a plain one?
The printed film behaves close to a standard front head. Sustain and tone come mostly from tuning and muffling.
