Detail 01
2 x 8-inch woofers and 1 x 2-inch compression driver
The module uses dedicated low-frequency drivers and a compression driver for high frequencies.
Product detailSKU #1500000033631
RCFHDL 10-A Active Line Array Module
1/2
Independent shopping perspective
The Korena take
HDL 10-A is an active full-range line array module for mid-sized venues and touring sound systems. Two 8-inch woofers and a 2-inch compression driver work with Class-D amplification rated at 700W RMS and 1,400W peak. Its 100° x 15° coverage pattern supports controlled audience coverage, while onboard DSP handles crossover points, driver protection and dynamic response. The compact composite enclosure is built for quick, secure rigging and weighs 44.9 lb for transport between productions.
Strong match
Who this is for
- Mid-sized venue systems requiring active line-array modules with controlled 100° x 15° coverage.
- Touring productions where quick, secure rigging and a 44.9 lb module support efficient changeovers.
- Live sound systems needing XLR/TRS input, XLR output, and onboard DSP management.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
100° x 15° coverage pattern
Coverage is specified as 100 degrees horizontal by 15 degrees vertical.
Detail 03
700W RMS / 1,400W peak Class-D amplifier
Amplification is built into the module; separate amplifier power is not required for the listed output.
Detail 04
65Hz–20kHz frequency response
The stated operating frequency range spans 65Hz through 20kHz.
Detail 05
1 XLR/TRS input; 1 XLR output
Provides one combination XLR/TRS input and one XLR output connection.
Detail 06
44.9 lb; 22.4 x 17.1 x 11.5 inches
These are the listed transport weight and enclosure dimensions.
Final check
Know before you order
- 01Plan the system around the module’s 100° x 15° coverage pattern.
- 02Verify the rigging layout accommodates the listed 22.4 x 17.1 x 11.5 inch enclosure dimensions.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is the HDL 10-A powered?
Yes. It is an active module with a Class-D amplifier rated at 700W RMS and 1,400W peak.
02What drivers are fitted?
It has two 8-inch woofers and one 2-inch compression driver.
03What are its input and output connections?
The module has one XLR/TRS input and one XLR output.
04What is the specified coverage?
Its coverage pattern is 100° x 15°.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
4 detailsSound
- Max SPL
- 133dB
- Speaker Configuration
- Active
- Frequency Response
- 65Hz–20kHz
- Power
- 700W RMS, 1,400 peak power
1 detailsBody & build
- Type
- Full range
2 detailsConnections & power
- Output Connector
- 1 XLR
- Input Connector
- 1 XLR/TRS
2 detailsSize & weight
- Weight
- 44.9
- Dimensions
- 22.4 inch x 17.1 inch x 11.5 inch
5 detailsOther
- Configuration
- Active
- Coverage Pattern
- 100° x 15°
- Lf Driver
- 2 x 8 inch woofers
- Hf Driver
- 1 x 2 inch compression driver
- Amplifier
- Class-D
