Detail 01
10-inch woofer; 1.75-inch-voice-coil compression driver
The speaker uses a 10-inch woofer with a compression-driver high-frequency section.
Product detailSKU #1500000400169
RCFART 910-AX 10" 2100W Professional Powered Speaker With Bluetooth
1/8
Independent shopping perspective
The Korena take
The ART 910-AX is a 10-inch powered speaker that combines its amplifier with digital processing, Bluetooth streaming, and onboard control. Its touchscreen, encoder, and iOS/Android app give you access to available functions and parameters without treating the speaker as a fixed-output box. Two microphone inputs include 48V phantom power, and the XLR output section offers mix, stereo, channel-link, and subwoofer crossover routing. It can operate by itself or alongside other speakers.
Strong match
Who this is for
- Compact PA rigs that need amplified sound, two microphone inputs, and onboard digital adjustment.
- Multi-speaker setups using mix, stereo, channel-link, or RCF subwoofer crossover output routing.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
100° × 60° coverage; 130 dB maximum SPL
Its specified listening-area coverage is 100 degrees horizontal by 60 degrees vertical, with a 130 dB maximum SPL.
Detail 03
Two microphone inputs with 48V phantom power
It accommodates two microphone inputs and offers phantom power.
Detail 04
Six processing channels
Digital processing is built into the speaker.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I stream audio over Bluetooth?
Yes. Bluetooth supports audio streaming to the speaker, along with remote control.
02How is it controlled?
Functions and parameters are available from the onboard color touchscreen and encoder, or the iOS and Android app.
03What outputs are available?
The XLR output options are mix out, crossover out with RCF subwoofer presets, stereo output, and CH1 link out.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSound
- Frequency Response
- 20 Hz ÷ 20 Hz
- Send Effects
- 1
- Main Out Impedance
- 150 ohm
2 detailsPickups & controls
- Controls
- Color touch panel, data entry/volume encoder, dedicated App for iOS and Android
- Remote Controlled Storable Gain
- Yes
1 detailsBody & build
- Color
- Red
10 detailsConnections & power
- Input Noise Level
- -114 dBu A-Weighted
- Input Signal
- bal/unbal
- Output Connectors
- XLR
- Line Input Impedance
- 21 kohm
- Total Power
- 2100 W Peak, 1050 W RMS
- Input Channels EQ
- 2 Shelving 1
- Mic Inputs Impedance
- 6 kohm
- Phantom Power 48v
- Yes
- Stereo Line Input Impedance Kohm
- 13 kohm
- Input Connectors
- Combo XLR/Jack
30 detailsOther
- Mic
- 2
- D A Dynamic Range
- 114 dB
- Main Out Type
- MIX OUT, CROSSOVER OUT with RCF SUBWOOFERS presets, STEREO OUTPUT, CH1 LINK OUT.
- Description
- 3 Band EQ: High and Low band shelving, MID band peak on IN, 5 Band EQ: 4 Full Parametric, 1 High Shelving and HPF, 24 dB/Oct on amplifier and MAIN output.
- Crossover Frequencies
- 1600Hz
- Main Out Level
- 22 dBu
- Rcf Compressors
- Compressors on MIC/LINE CH1 & CH2 Inputs
- Main Mix
- 1
- Low Cut
- 20 Hz ÷ 400 Hz
- Limiter
- Soft Limiter
- Low Frequencies
- 1400 W Peak, 700 W RMS
- Mono Line
- 2
- A D Dynamic Range
- 114 dB
- Signal Processing
- 24 Bit
- Connections
- VDE
- Compression Driver
- 1 x 1.0'', 1.75'' v.c
- Gain Range
- 0 dB ÷ 42 dB
- Protections
- Thermal, RMS
- Processing Channels
- 6
- Dynamic Range
- 110
- Stereo Line
- 1
- Max SPL 1m
- 130 dB
- Horizontal Coverage Angle
- 100°
- Gain Selection
- 0 dB ÷ 10 dB
- Thd N 20db Gain 0dbu Out
- 0.005% A-Weighted
- High Frequencies
- 700 W Peak, 350 W RMS
- Cooling
- Convection
- A D D A Conversion
- 32 Bit @ 48.0 kHz
- Woofer
- 10'', 2.5'' v.c
- Vertical Coverage Angle
- 60°
