Detail 01
18-gauge conductors
Standard for moderate-power amps. Higher current rigs lose a little power to cable resistance over long runs.

Independent shopping perspective
A 20-foot 18-gauge speaker cable for connecting an amp head to a cabinet or a power amp to passive PA speakers. Basic, functional wiring.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Standard for moderate-power amps. Higher current rigs lose a little power to cable resistance over long runs.
Detail 02
Correct for speaker use. Speaker-level signal is strong enough that shielding is unnecessary and would add capacitance.
Detail 03
Enough to reach a cabinet across a stage without a giant coil left over at your feet.
Detail 04
Two heavy conductors carry amp output. Using instrument cable here can overheat the thin conductor and stress the amp.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Speaker cable uses two heavy unshielded conductors to carry amplifier output. Instrument cable uses one thin shielded conductor for weak signal. Swapping them can overheat the cable and stress your amplifier.
No. With no shielding, a guitar plugged in through this will pick up hum and buzz. Use a shielded instrument cable from guitar to amp, and this one from amp head to cabinet.
It handles typical guitar and bass heads and moderate PA power fine over 20 feet. For high-wattage power amps driving long runs, heavier 14 or 16 gauge loses less power.
No, this is a 1/4" cable. Many larger PA cabinets and power amps use Speakon jacks, so check both ends of your rig before ordering.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.