Detail 01
1/4-inch TRS stereo input
Accepts signals from an audio interface headphone output for reamping.
Product detailSKU #1500000386625
Radial EngineeringReamp HP Compact Reamper
1/3
Independent shopping perspective
The Korena take
The compact Reamp HP makes reamping possible from an audio interface's headphone output, so you can route a chosen track to an amplifier or effects pedals without repatching monitor feeds. Its 1/4-inch TRS input accepts the interface headphone signal, while the 3.5 mm input accommodates smartphones, tablets, and laptops. A mono switch can sum stereo material; level control sets the outgoing signal. An isolation transformer and ground-lift switch are included to address hum and buzz during recording.
Strong match
Who this is for
- Home-studio reamping when the interface has limited output connections available.
- Sending recorded guitar, bass, vocal, or stereo tracks through amplifiers and effects pedals.
- Quick reamping connections from a headphone output without moving monitor cables.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
3.5 mm mini input
Connects to the outputs of smartphones, tablets, and laptops.
Detail 03
Mono switch
Sums left and right channels; when off, only the right channel feeds the output.
Detail 04
Isolation transformer and ground lift
Addresses buzz and hum from ground loops.
Detail 05
Level control
Adjusts the output signal for gain staging through amplifiers and pedals.
Final check
Know before you order
- 01To use a headphone-output track, assign the track to the right channel; with mono disengaged, the right channel feeds the output.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I reamp without unplugging my studio monitors?
Yes. The Reamp HP is designed to take the signal from an interface headphone-output jack.
02Can it accept a stereo track?
Yes. Its mono switch can sum the left and right input channels together.
03What output feeds an amp or pedals?
The 1/4-inch Reamp output is used to feed guitar amps and effects pedals.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsConnections & power
- Output
- 1/4 inch Reamp output used to feed guitar amps and effects pedals
- Input
- 1/4 inch TRS stereo input jack accepts signals from the headphone output on an audio interface to use for Reamping
4 detailsOther
- Mono
- Sums the left and right input channels together—when disengaged, only the right channel is used to feed the output of the Reamp HP
- Level
- Controls the output signal level from the Reamp HP for optimal gain-staging through amplifiers and pedals
- Lift
- Disconnects pin-1 at the input connectors to remove buzz and hum from ground loops
- Mini in
- 3.5mm input jack for easy connection to the outputs of smartphones, tablets and laptops
