Korena
Product detailSKU #1500000334555

Radial EngineeringPZ-Pro 2-Channel Acoustic Instrumental Preamp

Radial Engineering
Radial Engineering PZ-Pro 2-Channel Acoustic Instrumental Preamp
1/2

Independent shopping perspective

The Korena take

Radial’s PZ-Pro is a two-channel instrument preamp, switcher, and stage-control hub for managing two sources in performance. Switch between them or blend them, then set input level, semi-parametric EQ, and feedback-reduction filters for each channel independently. A single footswitch can bring pedals and a signal booster into the setup, while the FX loop provides wet/dry control. Balanced XLR outputs send the finished signal to a PA or recording interface, with pre- and post-EQ options available.

Radial Engineering PZ-Pro 2-Channel Acoustic Instrumental Preamp product detail
Product studyRadial Engineering PZ-Pro 2-Channel Acoustic Instrumental Preamp

Strong match

Who this is for

  • Stage sets that switch or blend two instrument sources with independent level and EQ control.
  • Performances needing feedback-reduction filters on both channels and footswitchable effects control.
  • Rigs using a dynamic or condenser microphone through the Channel B input.

Consider the trade-offs

When to look elsewhere

  • Rigs requiring more than two input channels at the same time.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

Two channels

You can switch between two sources or blend them together.

Detail 02

Per-channel semi-parametric EQ and input level

Each channel can be adjusted separately.

Detail 03

Per-channel filters

Each channel includes controls intended to reduce feedback on stage.

Detail 04

Channel B microphone input

Channel B accepts a dynamic or condenser microphone, including clip-on instrument and vocal microphones.

Detail 05

FX loop with wet/dry control

Pedal effects can be blended in at the desired amount and switched in or out.

Detail 06

Balanced XLR direct outputs

The unit can feed a PA system or recording interface with pre-EQ or post-EQ output choices.

Final check

Know before you order

  1. 01Only Channel B includes the microphone input.
  2. 02Choose between the available pre-EQ and post-EQ direct outputs when connecting to a PA or recording interface.

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can I use two sources with the PZ-Pro?

Yes. Its two input channels can be switched between or blended together.

02Can it accept a microphone?

Yes. Channel B accepts dynamic and condenser microphones, including clip-on instrument and vocal microphones.

03Can I control effects from the unit?

Yes. The FX loop has wet/dry control and a footswitch to bring effects in or out of the signal chain.

04Where can the direct outputs go?

Its balanced XLR direct outputs can feed a PA system or recording interface.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

1 detailsPickups & controls
Pickup Configuration
Piezo