Detail 01
Passive operation
No power is required.
Product detailSKU #1500000145211
Radial EngineeringCab-Link Passive Speaker Cabinet Merger
1/4
Independent shopping perspective
The Korena take
Cab-Link connects two speaker cabinets to an amplifier that has only one speaker output. It works without power and gives you series or parallel wiring choices so the cabinets’ total impedance can be matched to the amplifier output. Connect the cabinets by speaker cable at A and B, then use the top-panel guide to choose the corresponding amplifier input. Its line output, with dedicated level control, can also feed another amplifier or an effects unit.
Strong match
Who this is for
- Running two speaker cabinets from an amplifier equipped with a single speaker output.
- Selecting a series or parallel cabinet connection based on the cabinets’ impedance ratings.
- Feeding another amplifier or an effects unit from the adjustable line output.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Series and parallel inputs
Lets the two connected cabinets be configured to match the amplifier’s output impedance.
Detail 03
Line output with level control
Provides an adjustable output for another amplifier or an effects unit.
Detail 04
Up to 400-watt amplifier outputs
The unit is rated to handle amplifier outputs up to 400 watts.
Final check
Know before you order
- 01Check both cabinet impedance ratings and use the top-panel guide to select the required series or parallel amplifier input.
- 02Both cabinets connect to outputs A and B with speaker cables.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does Cab-Link need power?
No. It is completely passive.
02Can it connect two 8-ohm cabinets?
Yes. Two 8-ohm cabinets can be wired in series for a 16-ohm amplifier or in parallel for a 4-ohm amplifier.
03What can the line output feed?
It can feed another amplifier or an effects unit, with a dedicated level control.
