Korena
Product detailSKU #1500000017294

Radial EngineeringJDX Direct-Drive Amp Simulator and DI Box Guitar Effects

Radial Engineering
Radial Engineering JDX Direct-Drive Amp Simulator and DI Box Guitar Effects
1/5

Independent shopping perspective

The Korena take

Radial’s JDX Direct-Drive puts amp-style guitar voicing and DI routing on a pedalboard. Its filtered JDX sound is modeled after an SM57 placed at a Marshall 4x12, with further voicing settings inspired by a vintage Marshall tube head and an early Fender Twin; a presence switch adds extra sparkle. Send guitar-level signal from the 1/4-inch output or balanced signal by XLR to the PA, while the passive thru can feed a stage amp. A buffered tuner output, polarity reverse, and ground lift support practical live routing.

Radial Engineering JDX Direct-Drive Amp Simulator and DI Box Guitar Effects product detail
Product studyRadial Engineering JDX Direct-Drive Amp Simulator and DI Box Guitar Effects
Radial Engineering JDX Direct-Drive Amp Simulator and DI Box Guitar Effects alternate view
Alternate view

Strong match

Who this is for

  • Pedalboard-based gigs where the PA needs a balanced guitar signal and a stage amp may still be fed.
  • Stage rigs needing a dedicated buffered tuner output plus polarity and ground-loop controls.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Radial Engineering JDX Direct-Drive Amp Simulator and DI Box Guitar Effects construction detail

Detail 01

Passive thru output

It can feed a stage amp while the Direct-Drive handles its other outputs.

Detail 02

Balanced XLR output

It provides a balanced connection for feeding a PA.

Detail 03

Polarity reverse and ground lift

They help phase-align monitors with a stage amp and address hum or buzz from ground loops.

Detail 04

9V power

It can run from a standard 9V supply or a typical pedalboard power brick.

Final check

Know before you order

  1. 01Plan for a standard 9V power supply or pedalboard power brick.
  2. 02Its listed dimensions are 8.8 × 3.78 × 8.9 inches; listed weight is 6.61.
Radial Engineering JDX Direct-Drive Amp Simulator and DI Box Guitar Effects close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can it feed both a PA and a stage amp?

Yes. It has a balanced XLR output for the PA and a passive thru output for a stage amp.

02Does it have a tuner connection?

Yes. The dedicated tuner output is buffered to avoid pickup loading and quartz-clock noise.

03How is it powered?

Use a standard 9V power supply or a typical pedalboard power brick.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

2 detailsSize & weight
Dimensions Wxhxd
8.8 inch x 3.78 inch x 8.9 inch
Weight
6.61

Complete your setup

Worth comparing

More from Radial Engineering