Korena
Product detailSKU #1500000034416

Radial EngineeringBigShot EFX Effects Loop Switcher Pedal

Radial Engineering
Radial Engineering BigShot EFX Effects Loop Switcher Pedal
1/4

Independent shopping perspective

The Korena take

Radial’s BigShot EFX organizes two pedal groups into separate true-bypass loops. Leave a noisy or non-true-bypass effect available when needed, then remove it from the signal path when it is not. During a performance, loop A can remain active while you prepare loop B; one footswitch then brings that prepared pedal chain in. The loops run in series, so A can feed B, and the audio path operates without a power supply.

Radial Engineering BigShot EFX Effects Loop Switcher Pedal product detail
Product studyRadial Engineering BigShot EFX Effects Loop Switcher Pedal
Radial Engineering BigShot EFX Effects Loop Switcher Pedal alternate view
Alternate view

Strong match

Who this is for

  • Pedalboards needing two separately switched pedal groups in a series signal chain.
  • Live changes where the next effect chain must be readied without interrupting the current sound.
  • Tight pedalboards where a compact loop switcher and clear status LEDs matter.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Radial Engineering BigShot EFX Effects Loop Switcher Pedal construction detail

Detail 01

Two true-bypass loops in series

Loop A can feed loop B, allowing two pedal chains to be used together.

Detail 02

Audio path operates without power

The switching audio path can be used with or without a power supply.

Detail 03

3.94 x 2.05 x 3.94 in.

Its compact footprint is intended for pedalboards where space is limited.

Final check

Know before you order

  1. 01The two loops are wired in series rather than as independent parallel paths.

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can I set up two pedal groups?

Yes. The BigShot EFX provides two separate effects loops.

02Can I prepare a second sound while the first loop is active?

Yes. You can switch pedals in loop B while loop A is in use, then activate the prepared chain with one footswitch.

03Does the audio path need power to work?

No. The audio path operates without a power supply.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

2 detailsSize & weight
Dimensions Wxhxd
3.94 inch x 2.05 inch x 3.94 inch
Weight
1.23

Complete your setup

Worth comparing

More from Radial Engineering