Detail 01
20 strands
More wires contacting the head means fuller, louder response and more sustain than a 16 or 12 strand set.
Product detailSKU #1274034479835
PuresoundBlasters Series 20-Strand Snare Wire 14 In
1/2
Independent shopping perspective
The Korena take
20-strand snare wire for a 14" snare. More strands than standard, so the response is fuller and the sound is thicker.
Strong match
Who this is for
- Rock and louder playing where the snare needs body
- Replacing worn or bent wires on a 14" snare
- Drummers wanting more sensitivity across the whole head
Consider the trade-offs
When to look elsewhere
- Players wanting a dry, tight, controlled snare crack
- Anyone chasing a crisp jazz response from fewer strands
- Snares of any diameter other than 14 inches
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
14 inch
Sized to a 14" snare shell. Wires from a 13" or 12" drum will not seat correctly.
Detail 03
Bottom-side hardware
Mounts against the resonant head under the drum. Nothing about your batter head or tuning changes.
Detail 04
Higher strand count
Also raises the risk of buzz from toms and bass. Tension and strainer setting matter more here.
Final check
Know before you order
- 01Strings or straps to mount the wires are often not included.
- 02You will need to remove the resonant head to install.
- 03Check your strainer type, since cord and strap mounts differ.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What is the difference between 20 strand and 16 strand?
More strands means more wire touching the head. 20 strand gives a fuller, thicker, louder snare sound. 16 strand is drier and more controlled.
02Will these fit a 13 inch snare?
No. These are cut for a 14" snare. Wires need to match the drum diameter to sit correctly against the resonant head.
03How hard is it to install?
You loosen the strainer and butt plate, take off the old wires, and mount the new set centered on the head. Takes a few minutes with a drum key.
04Will these cause more snare buzz?
They can. More strands pick up more sympathetic vibration from toms. Even tension and a properly seated wire set keep it under control.
