Detail 01
Three independent channels
Clean, Gain, and Overdrive use distinct circuits rather than one shared channel circuit.
Product detailSKU #1500000414265
PRSMark Tremonti MT 100 Tube Guitar Amp Head - Black
1/3
Independent shopping perspective
The Korena take
PRS built the MT 100 around three separate tube circuits: Clean, Gain, and Overdrive. Each channel has its own voice and dedicated preamp-tube section, while the shared 12AX7 tube type keeps servicing consistent across the amp. Channel selection is available from the front panel or the included footswitch, with matching indicator lights at both locations. At 100 watts, it is a substantial amp head for rigs that need clean, high-gain, and overdrive channel options in one unit.
Strong match
Who this is for
- Stage rigs that need to move among clean, gain, and overdrive channels from an included footswitch.
- Players routing external effects through a series, tube-driven effects loop.
- Setups using the provided 8-ohm parallel or 16-ohm speaker-output options.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Included footswitch
Select channels away from the amp face; its channel lights correspond to the lights on the head.
Detail 03
Adjustable bias with monitoring
The amp provides bias adjustment and monitoring.
Detail 04
43.2 lb. (19.6 kg)
This is a 43.2-pound amp head to account for when moving the rig.
Final check
Know before you order
- 01Confirm your speaker setup matches the available outputs: two 8-ohm connections in parallel or one 16-ohm connection.
- 02The footswitch connection uses a 7-pin DIN jack.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many channels does the MT 100 have?
Three: Clean, Gain, and Overdrive.
02Can I switch channels remotely?
Yes. The included footswitch selects channels and has corresponding channel lights.
03What tubes does it use?
It uses eight 12AX7 preamp tubes and four 6L6GC power tubes.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Effects Loop
- Series, Tube Driven
- Wattage
- 100
3 detailsPickups & controls
- Footswitch Jack
- 7-pin DIN
- Ohm Switching
- Two 8 ohm (parallel), one 16 ohm, 1/4 inch phone
- Preamp Tubes
- Eight 12AX7s
1 detailsBody & build
- Color
- Black
2 detailsConnections & power
- Extension Speaker Jacks
- 3
- Power Tubes
- Four 6L6GCs
5 detailsSize & weight
- Amp Depth
- 10.85 inch (27.56 cm)
- Amp Height
- 11 inch (27.94 cm)
- Weight
- 43.2
- Amp Width
- 26 inch (66.04 cm)
- Amp Weight
- 43.2 lb. (19.6 kg)
13 detailsOther
- V7
- Effects Loop
- V8
- Phase Inverter
- Covering
- Black Tolex
- V5 Amp V6
- Lead Channel
- V3 Amp V4
- Overdrive Channel
- Bias
- Adjustable with Monitoring
- H T B Fuse
- Screwdriver Accessible
- Clean Channel
- Presence, Master Volume, Treble, Middle, Bass, Volume
- Inlet
- Fused Power Inlet (IEC)
- Lead Channel
- Presence, Master Volume, Treble, Middle, Bass, Gain
- V1
- Input
- V2
- Clean Channel
- Overdrive Channel
- Presence, Master Volume, Treble, Middle, Bass, Gain
