Detail 01
3 springs in the pack
Three is the most common count on a Strat-style trem. A full replacement set, not a partial.
Product detailSKU #1292606661802
ProlineTremolo Spring 3 Pack
Independent shopping perspective
The Korena take
Replacement springs for a standard tremolo block on Strat-style guitars. Buy if yours are rusted, mismatched, or you need more tension for heavier strings.
Strong match
Who this is for
- Restoring bridge tension after switching to heavier gauge strings
- Replacing corroded or squeaky springs on an older guitar
- Keeping spares in the case for setup work
Consider the trade-offs
When to look elsewhere
- Guitars with hardtail or fixed bridges — no spring cavity
- Floyd Rose systems needing specific tension springs matched to that setup
- Anyone wanting noise-canceling or graduated-tension upgrade springs
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Tremolo springs
They counter string pull against the bridge. More springs or tighter claw screws means a stiffer, harder-to-dive bar.
Detail 03
Sold as a pack
Springs should be swapped as a matched set. Mixing old and new gives uneven tension and tuning drift.
Detail 04
Under $12
Consumable hardware. Cheap enough to keep a spare set with your setup tools.
Final check
Know before you order
- 01No spring claw, screws, or bridge block included — springs only
- 02You will need to remove the back cavity cover to install
- 03Expect to re-level the bridge and retune after swapping
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many springs do I need in my tremolo?
Most Strat-style guitars use three. Fewer springs makes the bar easier to move; more stiffens it. Heavier string gauges usually need more tension.
02Will this fit my Floyd Rose?
These are standard tremolo springs. Floyd Rose systems use their own spring specs, so match springs to that hardware instead.
03Do I have to change all three at once?
Yes. Mixing worn and new springs gives uneven pull across the block, which causes tuning instability.
04Will my guitar need a setup after installing these?
Plan on it. New springs change bridge tension, so the bridge angle, action, and intonation will all shift.
