Detail 01
Flush mount
Sits level with a flat body face or jack plate rather than recessed in a cup route.
Product detailSKU #1292606661820
ProlineFlush Mount 1/4" Output Jack Chrome
1/8
Independent shopping perspective
The Korena take
A flush-mount 1/4" output jack in chrome for repairing or replacing a failed jack on an electric guitar or bass.
Strong match
Who this is for
- Replacing a crackling or intermittent jack on an existing instrument
- Builders wiring up a partscaster or kit body
- Keeping a spare in a gig repair kit
Consider the trade-offs
When to look elsewhere
- Guitars with a barrel-style side jack and cup routing
- Players unwilling to solder two wires
- Anyone needing a stereo or TRS jack for active electronics
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
1/4 inch
The standard instrument cable size, so any normal guitar cable plugs straight in.
Detail 03
Chrome
Bright silver finish that matches chrome tuners, bridges, and knobs on most stock guitars.
Detail 04
Mono output jack
Two solder points, tip and sleeve. Works with passive pickups; not a battery switch for actives.
Final check
Know before you order
- 01Soldering iron and solder are needed. Not included.
- 02Check whether your guitar uses a flat plate or a recessed cup route.
- 03Existing hole diameter must match; enlarging a body hole is not trivial.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this fit my Strat?
Not directly. Strats use a recessed cup jack. This is a flush-mount jack for a flat body face or a flat jack plate.
02Does it come with a plate or nut?
Plan on reusing the mounting nut and washer from your old jack, and buy a jack plate separately if you need one.
03Can I use this for a bass with active pickups?
No. Active electronics need a stereo jack so the sleeve switches the battery on and off. This is a mono jack.
04Do I need to solder it?
Yes. Two connections: hot from the output wire to the tip lug, ground to the sleeve lug.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
5 detailsOther
- Category Source
- detail
- Tier
- new
- Korena Special
- false
- Source Id
- site51292606661820
- Prop65
- WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer, and Cadmium, which is known to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Worth comparing
1 of 12
More from Proline
1 of 8
