Detail 01
Angle-straight configuration
The cable has one angled and one straight connector.
Product detailSKU #1336752541692
ProCoSEGL StageMASTER Angle-Straight Instrument Cable - 10 ft.
Sale
Independent shopping perspective
The Korena take
A 10 ft StageMASTER instrument cable with one angled and one straight connector, for instrument-cable runs that call for that connector layout.
Strong match
Who this is for
- 10 ft instrument-cable runs
- Connections needing one angled and one straight plug
Consider the trade-offs
When to look elsewhere
- Runs longer than 10 ft
- Connections needing two angled plugs
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
24 AWG, one-conductor shielded cable
The cable is specified as one-conductor and shielded.
Detail 03
50% shield coverage
Shield coverage is specified at 50%.
Final check
Know before you order
- 01Confirm which end needs the angled connector.
- 02Measure for a 10 ft run.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Are the connectors the same at both ends?
No. This version has one angled and one straight connector.
02How long is it?
10 ft.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Impedance 1mhz
- 70 ohm
3 detailsBody & build
- Color
- Black
- Insulation Material
- Polypropylene
- Conductor Material
- Bare annealed copper
3 detailsConnections & power
- Jacket Material
- Matte Polyvinyl Chloride
- Jacket Color
- Black
- Jacket Wall Thickness
- .060 inch, 1.62 mm
2 detailsSize & weight
- Outer Diameter
- .235 inch ±.005, 5.97 ±.127 mm
- Insulation Diameter
- .084 ±.002 inch, 2.13 ±.051 mm
12 detailsOther
- Shield
- Composite Conductive vinyl and copper serve
- Wall Thickness
- .010 inch (.254 mm) Diameter: .104 inch (2.64 mm)
- Conductor Gauge
- 24 AWG, 20 mm
- Shield Outer Layer
- Material: Bare annealed copper serve
- Stranding No Strands X Awg
- 7 x 32, 7 x .254 mm
- Shield Coverage
- 50%
- Velovity of Propagation
- 66%
- Shield Inner Layer
- Material: Semi-conductive PVC
- Insulation
- .030 inch, .762 mm
- Wire
- CS-INST.K 1-Conductor, Shielded
- Capacitance 1khz
- 30pf/ft., 98 pf/m
- Nominal Conductor Resistance 20 Ohm
- 24 ohm/kft. 79 ohm/km
