Detail 01
Eight 2-inch HF drivers over one 12-inch woofer
The driver arrangement places the high-frequency arc above the single woofer.
Product detailSKU #1500000336391
PreSonusCDL12P 1,000W Point Source/Line Array Constant Directivity Loudspeaker
Sale
1/8
Independent shopping perspective
The Korena take
CDL12P is a powered, active two-way loudspeaker that combines point-source and line-array approaches through constant directivity. Eight 2-inch high-frequency drivers arc above a 12-inch woofer, creating a shared acoustic axis when multiple cabinets are stacked. Its focused pattern is designed to keep SPL consistent across the frequency range on and off axis, supporting clear speech and natural music reproduction throughout a venue. Integrated rigging, dual-angle pole mounting and Dante networking support flexible system deployment.
Strong match
Who this is for
- Venue systems needing focused coverage with consistent SPL on and off axis.
- Stacked CDL12P arrays that share an acoustic axis across multiple cabinets.
- Speech and music reinforcement where clear articulation across the room matters.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
48 Hz–18 kHz (-3 dB)
Defines the published -3 dB frequency-response range.
Detail 03
1,000W program; 2,000W peak
States the cabinet’s listed total power output ratings.
Detail 04
Array Mode for one to six boxes
Provides an array-mode setting for systems using one through six cabinets.
Detail 05
Dante audio and control
Supports Dante networking for audio and control.
Detail 06
Dual-position 35 mm pole mount
Offers 0° and 10° pole-mount positions.
Final check
Know before you order
- 01Plan cabling around the single XLR input and direct XLR line output.
- 02For a stack, use the integrated rigging rated at a 10:1 load.
- 03Choose the relevant Array Mode setting when using one to six CDL12P cabinets.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can CDL12P cabinets be stacked?
Yes. The cabinet has integrated rigging, and Array Mode supports one to six boxes.
02What networking does it support?
It supports Dante for audio and control, plus control-only operation via locking Ethernet.
03What are its mounting options?
It has integrated rigging and a 35 mm dual-position pole mount with 0° and 10° positions.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsPickups & controls
- Pickup Configuration
- Active 2-way
1 detailsSize & weight
- Bandwidth
- 20Hz–20kHz
29 detailsOther
- Configuration
- Active 2-way
- Networking
- Dante (Audio and Control), Control (only) via Locking Ethernet
- Rigging Points
- Integrated Rigging (10:1 load)
- Effects
- 90 High-pass filter, Array Mode (1-6 boxes), Sub Mode (Off, CDL18s, ULT18 or AIR18s)
- Frequency Response (-10dB)
- 42Hz–19kHz
- Sample Rate
- 48kHz
- Tier
- new
- Frequency Response (-3dB)
- 48Hz–18kHz
- Controls
- Preset Select HPF On/Off
- Indicators
- Over Temperature, Signal, -3dB, Limiter, Clip, Network Status
- Category Source
- detail
- Output Connector
- Direct Line Out (XLR)
- Korena Special
- false
- Line Input Impedance
- 40 kohm
- Bit Depth
- 24-bit
- Crossover Frequency
- 420Hz
- Dynamic Range
- 119dB (A-weighted)
- Maximum Peak SPL
- 131dB
- Rated THD
- <0.05% (20Hz–20kHz)
- Mounting
- Dual-position pole mount (0° and 10°) 35 mm
- Type
- Class-D
- Maximum Input
- +4 dBu
- Input Channels
- 1 Line
- LF Power
- 1,000W Peak, 500W Program (250W RMS)
- Source Id
- site51500000336391
- HF Power
- 1,000W Peak, 500W Program (250W RMS)
- Input Connector Types
- 1 XLR
- Total Power Output
- 2,000W Peak, 1,000W Program (500W RMS)
- HPF
- 90Hz, 4th-order Butterworth
Complete your setup
Worth comparing
1 of 12
