Detail 01
2-ohm output
Delivers 900 W per channel at 1% THD, with both channels driven at 1 kHz.
Product detailSKU #1378824449363
PeaveyIPR2 2000 Power Amp
1/4
Independent shopping perspective
The Korena take
Peavey’s IPR2 2000 is a two-channel power amplifier using a resonant switch-mode supply and high-speed Class D topology. It is designed for efficient operation, low operating temperatures, and reduced weight, at 8.16 lb unpacked. Protection circuitry addresses demanding loads and power conditions, while DDT is intended to protect drivers and retain sonic integrity during extreme overload. The amp is specified for operation into loads as low as 2 ohms, with channel output ratings provided for 2-, 4-, and 8-ohm loads.
Strong match
Who this is for
- Two-channel amplification systems operating into loads down to 2 ohms.
- Installations where low operating temperature and an 8.16-pound unpacked amplifier are priorities.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
4-ohm output
Delivers 570 W per channel at 1% THD, with both channels driven at 1 kHz.
Detail 03
8-ohm output
Delivers 325 W per channel at 1% THD, with both channels driven at 1 kHz.
Detail 04
DDT protection
Designed to protect drivers and maintain sonic integrity during extreme overload conditions.
Final check
Know before you order
- 01Match the amplifier's stated output ratings to the load: 2, 4, or 8 ohms.
- 02The unpacked amplifier weighs 8.16 lb / 3.7 kg.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the IPR2 2000 operate at 2 ohms?
Yes. Its DDT circuitry supports operation into loads as low as 2 ohms.
02How much power does it provide at 4 ohms?
At 1% THD, both channels driven at 1 kHz, it is rated at 570 W per channel.
03What topology does it use?
It uses a high-speed Class D topology and a resonant switch-mode power supply.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsSound
- Rated Watts 2ch X 2 Ohms
- 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz.
- Rated Watts 2ch X 4 Ohms
- 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz.
- Rated Watts 2ch X 8 Ohms
- 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz.
5 detailsSize & weight
- Width Packed
- 12.4 inch(31.496 cm)
- Height Packed
- 21 inch(53.34 cm)
- Depth Packed
- 4.7 inch(11.938 cm)
- Weight Packed
- 10.80 lb(4.9 kg)
- Weight Unpacked
- 8.16 lb(3.7 kg)
