Detail 01
95–110 degree angle adjustment
A narrow, deliberate tilt range. Enough to aim the speaker at your head without pointing it into the ceiling.
Product detailSKU #1313854567371
On-StageRS7500 Tiltback Amp Stand
Sale
1/2
Independent shopping perspective
The Korena take
A tiltback stand that angles a combo amp up toward your ears, with a built-in mic mount. For players who can't hear their amp on stage.
Strong match
Who this is for
- Combo amps firing at your knees on a deep stage
- Gigs where you mic the cab every night
- Players hauling one amp to weekly rehearsals
Consider the trade-offs
When to look elsewhere
- Heads and cabinets over the 100 lb. limit
- Anyone wanting the amp at seated or table height
- Cabs much deeper than the 7.32 inch support arms
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
100 lb. weight capacity
Covers most tube combos with a 2x12 and a heavy transformer. Check your amp's weight before loading a large cabinet.
Detail 03
Mic mount, 23–37 inch height
Holds a mic in front of the speaker without a separate floor stand, and moves with the amp when you adjust the tilt.
Detail 04
Support arms 8–10 inches above the floor
Keeps the cab off the floor, which cuts the boom that builds up when a speaker couples to a stage deck.
Detail 05
Back bumper 19–36 inches
The rear post that sets the tilt. Taller amps need it high enough to catch the cab's back panel.
Detail 06
Folded to 5 x 4.5 x 26.5 inches
Packs down to a long, thin bundle that slides behind a car seat or alongside gear in a trunk.
Final check
Know before you order
- 01Weigh your amp — 100 lbs. is the ceiling, and tilting shifts load onto the rear post
- 02Support arms are 7.32 inches long, so a deep cab overhangs front and back
- 03Set the back bumper height to your amp's rear panel before loading it on
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will it hold my combo amp?
It's rated to 100 lbs., which covers most 1x12 and 2x12 tube combos. Weigh anything larger before you set it on.
02How far back does it tilt?
The angle adjusts between 95 and 110 degrees — enough to aim the speaker up toward your ears rather than at your legs.
03Can I mic the amp on the stand?
Yes. It has a mic mount adjustable from 23 to 37 inches, so the mic stays aimed at the speaker as you change the tilt.
04Will it fit in my car?
Folded it measures 5 x 4.5 x 26.5 inches — a long thin package that fits behind a seat or beside your amp in the trunk.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black Powder Coat Finish
6 detailsSize & weight
- Weight Capacity
- 100 lb.
- Back Bumper Height Adj
- 19 in.-36 in.
- Mic Mount Height Adj
- 23 in.-37 in.
- Height Adj
- 8 in.-10 in. (support arm height above floor)
- Support Arm Lengths
- 7.32 in.
- Folded Dimensions
- 5 in. x 4.5 in. x 26.5 in.
1 detailsOther
- Angle Adj
- 95-110
