Detail 01
0.008-inch stainless steel
A 0.20 mm stainless-steel shield with smooth, rounded edges.
Product detailSKU #1500000410717
Music NomadFret Shield Protector Guard for B-34" Bass Fret Scale
Independent shopping perspective
The Korena take
Music Nomad’s Fret Shield protects the fretboard during polishing, leveling, and crowning on 34-inch-scale 4- or 5-string basses with up to 24 frets. The reusable stainless-steel shield is 0.008 inches thick and accommodates narrow through jumbo fret sizes. Included rubber bands connect to its formed drop-down tabs to hold it in place and conform it to the fretboard radius. It is also designed for use with power buffing wheels, polishing pads, and other polishing systems.
Strong match
Who this is for
- Protecting a 34-inch-scale bass fretboard during polishing, leveling, or crowning.
- Fret work on 4- or 5-string basses with up to 24 frets.
- Using a fret shield with power buffing wheels or polishing pads.
Consider the trade-offs
When to look elsewhere
- Basses outside the specified 34-inch scale, 4- or 5-string format, or 24-fret maximum.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Tapered slots
Slots are sized to accommodate fret sizes from narrow to jumbo.
Detail 03
Drop-down edge tabs and rubber bands
The bands secure the shield and help it form to the fretboard radius.
Final check
Know before you order
- 01Confirm a 34-inch scale and no more than 24 frets.
- 02Confirm the bass has four or five strings.
- 03Connect the eighth tab’s rubber band diagonally to the seventh tab on the opposite side.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What basses does this Fret Shield fit?
It fits 34-inch-scale 4- and 5-string bass guitars with up to 24 frets, across narrow-to-jumbo fret sizes.
02Are rubber bands included?
Yes. Included rubber bands hold the shield in place.
03Can it be used with powered polishing tools?
Yes. It is designed and tested for power buffing wheels, power polishing pads, and other polishing systems.
