Detail 01
0.008-inch (0.20 mm) stainless steel
Provides the protective shield used while polishing frets.
Product detailSKU #1500000395413
Music NomadFret Shield Fretboard Protector Guard for M-25.34" Guitar Fret Scale
1/6
Independent shopping perspective
The Korena take
Built for fret-polishing work on guitars with a 25.34-inch scale, the M Fret Shield creates a reusable stainless-steel barrier over the fretboard. Smooth, rounded edges and its 0.008-inch thickness are designed to protect the board during the job. Formed lower edges let the included rubber bands hold it in place while keeping those bands below the polishing area. A hang hole makes it easy to keep with the rest of a maintenance kit.
Strong match
Who this is for
- Routine fret-polishing maintenance on guitars measured at a 25.34-inch scale length.
Consider the trade-offs
When to look elsewhere
- Guitars whose measured fret scale is not 25.34 inches.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Formed drop-down edges and included rubber bands
Hold the shield securely while keeping the bands below the top polishing surface.
Final check
Know before you order
- 01Confirm the scale by measuring from the nut's inside edge to the 12th-fret center, subtracting one inch, then doubling that result.
- 02The MN820 Tri-Beam Fret Scale Ruler can identify the correct Fret Shield size and is sold separately.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How do I confirm that this is the right size?
Measure from the inside edge of the nut to the center of the 12th fret. Subtract one inch, then double the result to calculate scale length.
02Are the holding bands supplied?
Yes. Rubber bands are included to secure the shield in place.
