Detail 01
TT (bantam) connectors on both ends
Fits bantam patchbays only. Smaller than 1/4-inch, so it packs into high-density bays used in pro rooms.
Product detailSKU #1316705828716
MogamiPure Patch TT-TT Patch Cable Black 24 in.
Independent shopping perspective
The Korena take
A 24-inch TT (bantam) patch cable for studio patchbays. For engineers wiring or repatching a bantam bay, not for instrument or line runs.
Strong match
Who this is for
- Repatching a bantam bay in a rack-mounted studio setup
- Longer diagonal jumps across a wide or two-tier patchbay
- Building a color-coded bay where black marks a signal group
Consider the trade-offs
When to look elsewhere
- Guitar, keyboard or pedalboard use — TT plugs won't fit
- Anyone whose gear uses 1/4-inch or RCA jacks
- Short point-to-point jumps where 24 inches becomes clutter
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
24-inch length
Long enough to cross a full bay or reach a second row. Excess cable hangs in front of the panel.
Detail 03
Black jacket
Reads as neutral in a bay. Useful as the default color when you reserve brighter jackets for special routing.
Detail 04
TT is a three-conductor plug
Carries tip-ring-sleeve, so it passes balanced signals or stereo, depending on how the bay is wired.
Detail 05
Sold as one cable
A stereo patch needs two. Bay-wide recabling needs as many as you have active points.
Final check
Know before you order
- 01Confirm your patchbay is bantam, not 1/4-inch — the two are not interchangeable
- 02One cable only; no adapters, labels or bundle included
- 03Measure your longest bay jump before buying all one length
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is TT the same as 1/4-inch?
No. TT (bantam) plugs are smaller and will not seat properly in a 1/4-inch jack. You need a bantam patchbay or a TT-to-1/4-inch cable instead.
02Can I use this as a guitar cable?
No. Guitar jacks are 1/4-inch. This has bantam plugs on both ends and is meant for patchbay routing.
03Is 24 inches too long?
For adjacent points, yes — it will sag. Pick 24 inches for cross-bay or row-to-row jumps and shorter cables for neighbors.
04Do I need one or two for stereo?
Two. This is a single cable, so a stereo pair through a bay takes one per channel.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
