Detail 01
Star-quad (Neglex Quad) construction
Four conductors wired as two pairs instead of two single wires, which cancels magnetic hum better than standard cable on short, cramped runs.
Product detailSKU #1275776902286
MogamiGold Studio Neglex Quad Mic Cable With Neutrik XLR Connectors - 6 ft.
Independent shopping perspective
The Korena take
A 6 ft star-quad microphone cable with Neutrik XLR connectors, aimed at studio work where short runs sit close to power and computer gear.
Strong match
Who this is for
- Mic to preamp in a small room or vocal booth
- Short runs beside power supplies, screens and dimmers
- Studios standardizing on one mic cable across every channel
Consider the trade-offs
When to look elsewhere
- Stage runs — 6 ft barely reaches from a stand to a stagebox
- Line-level 1/4" gear, which needs TRS not XLR
- Anyone who just needs a spare and does not care about hum
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Neutrik XLR connectors
Locking latch and a solid strain relief, so the cable stays seated on a stand and survives repeated plugging.
Detail 03
Balanced XLR
Noise induced along the run cancels at the preamp input. It also passes 48V phantom power to condenser mics.
Detail 04
6 ft length
A desk or booth distance. Fine for a mic on a short stand next to your interface, not for anything across a room.
Detail 05
Quad cable weight
Thicker and stiffer than a standard two-conductor mic cable, so it coils larger and holds its shape more.
Final check
Know before you order
- 01XLR only — it will not connect to a 1/4" input without an adapter
- 02Condenser mics still need phantom power from your preamp
- 03Measure first; 6 ft disappears once the mic is on a boom
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does this carry phantom power?
Yes. A balanced XLR cable passes 48V from your preamp or interface to a condenser mic. The cable itself supplies nothing.
02What does star-quad actually do for me?
It uses two conductor pairs instead of one, which cancels magnetic hum from power supplies and transformers more effectively than standard mic cable.
03Can I use it for line-level gear?
Yes, between devices with XLR ins and outs. For 1/4" jacks you would need a different cable, not an adapter on this one.
04Is 6 ft long enough for a vocal booth?
Only for a mic close to the preamp or a wall panel. A stand across a booth usually wants 10 to 25 feet.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
