Korena
Product detailSKU #1500000357607

MarkbassNano Mark II 300W Bass Amplifier Head Gold

Markbass
funkjazz
Markbass Nano Mark II 300W Bass Amplifier Head Gold
1/5

Independent shopping perspective

The Korena take

Nano Mark II puts a 300-watt MPT power amp into a 3.20-pound bass head. Its compact control layout includes low, low-mid, high-mid, and high EQ bands, each with ±16 dB adjustment. The bi-band limiter is designed to react quickly and dynamically, preserving an open high end at louder settings. An optional single footswitch connects at the rear and calls up a scooped-mid EQ setting for slap or pick bass. The head also provides a SpeakON/1/4-inch combo speaker output and effects send/return connections.

Markbass Nano Mark II 300W Bass Amplifier Head Gold product detail
Product studyMarkbass Nano Mark II 300W Bass Amplifier Head Gold
Markbass Nano Mark II 300W Bass Amplifier Head Gold alternate view
Alternate view

Strong match

Who this is for

  • Rehearsal, gig, or recording travel where a 3.20-pound 300-watt bass head is useful.
  • Slap or pick bass passages using the footswitch-selectable scooped-mid EQ setting.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Markbass Nano Mark II 300W Bass Amplifier Head Gold construction detail

Detail 01

Four-band EQ

Low, low-mid, high-mid, and high bands each offer ±16 dB adjustment.

Detail 02

SpeakON/1/4-inch combo speaker output

The speaker connection accepts either connector format listed for the head.

Final check

Know before you order

  1. 01Footswitch control of the scooped-mid EQ requires an optional single footswitch connected to the dedicated rear input.
Markbass Nano Mark II 300W Bass Amplifier Head Gold close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can the scooped-mid EQ be switched by foot?

Yes. Connect an optional single footswitch to the dedicated rear input.

02How much does Nano Mark II weigh?

Its listed weight is 3.20 pounds.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

3 detailsSound
Return Impedance
33 kOhm, max. voltage: 10 Vpp
Speaker Out
speakON/1/4” combo
Send Effects
unbalanced, max. voltage 20 Vpp (Pre Eq)
1 detailsBody & build
Color
Gold
1 detailsConnections & power
Input Impedance
1 mOhm, max. voltage: 15 Vpp
4 detailsSize & weight
Weight
3.2
Depth
8.27 inch
Width
7.87 inch
Height
2.09 inch
4 detailsOther
Mid High
center frequency 800Hz; level: ±16 dB
High
center frequency 5kHz; level: ±16dB
Low
center frequency 60Hz; level: ±16dB
Mid Low
center frequency 360Hz; level: ±16dB

Worth comparing

More from Markbass