Korena by Guitar Center
Product detailSKU #1500000465256

LaneyDigbeth Foundry DBF200H 200W Bass Amplifier Head - Black

Laney
aggressivehigh outputmetalhard rock
Laney Digbeth Foundry DBF200H 200W Bass Amplifier Head - Black
1/8

Independent shopping perspective

The Korena take

DBF200H is a 200W RMS solid-state bass head with separate FET clean and Overdrive channels, plus a Mix setting that combines them. Its 3-band EQ offers four switchable mid voicings, alongside Tilt and Preshape controls for deliberate tone changes. For practical routing, it provides a pre-EQ balanced XLR DI out, FX loop, AUX input, headphone jack, and a SpeakON combi speaker output. The compact 15mm plywood enclosure has black vinyl, steel corners, and a reinforced top handle.

Laney Digbeth Foundry DBF200H 200W Bass Amplifier Head - Black product detail
Product studyLaney Digbeth Foundry DBF200H 200W Bass Amplifier Head - Black
Laney Digbeth Foundry DBF200H 200W Bass Amplifier Head - Black alternate view
Alternate view

Strong match

Who this is for

  • Bass rigs that need to blend FET clean tone with the dedicated Overdrive channel.
  • Recording or PA routing through the pre-EQ balanced XLR DI output.
  • Rehearsal and stage setups using an external speaker connection with a 4-ohm minimum load.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Laney Digbeth Foundry DBF200H 200W Bass Amplifier Head - Black construction detail

Detail 01

Channel select: FET, Drive, Mix

Select the clean channel, the overdrive channel, or a blend of both.

Detail 02

Four switchable mid voicings

Adds four midrange options within the 3-band EQ section.

Detail 03

FX loop with send/line out

Provides send and return connections for external effects routing.

Detail 04

7.6 x 15.6 x 8.6 inches; 12.8 lb

Keeps the 200W head in a compact, lightweight format.

Final check

Know before you order

  1. 01The SpeakON combi speaker output specifies a minimum 4-ohm load.
  2. 02The remote socket is for the optional FS-1 MINI footswitch, which controls Drive/Mix on and off.
  3. 03The balanced XLR DI output is pre-EQ.
Laney Digbeth Foundry DBF200H 200W Bass Amplifier Head - Black close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can the clean and drive tones be combined?

Yes. The Mix channel setting combines the FET clean and Overdrive channels.

02Does it have a direct output for a PA or recording setup?

Yes. It has a balanced male XLR DI output, specified as pre-EQ.

03What speaker load does the output require?

The SpeakON combi speaker output has a minimum load of 4 ohms.

04Can I connect external effects?

Yes. The DBF200H includes an FX send/line out and an FX loop with send and return.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

4 detailsPickups & controls
Master controls
Master volume, Tilt control, Preshape switch
Aux controls
3.5mm stereo aux in, 3.5mm headphone jack
Footswitch
Remote socket for optional FS-1 MINI (Drive/Mix on/off)
Input controls
Channel select (FET/Drive/Mix), Drive, Volume
3 detailsBody & build
Cabinet material
15mm plywood
Country of Origin
China
Color Finish
Hard-wearing black vinyl with steel corners
2 detailsConnections & power
AC input
IEC C14 inlet connector
Power output
200W RMS
2 detailsSize & weight
Carton dimensions (H x W x D)
9.8" x 17.9" x 10.8"
Carton weight
17.2 lb.
21 detailsOther
Power supply
Internal universal 100–240V~ 50/60Hz switched-mode power supply
Amplifier type
Solid-state
Channels
2 (FET clean and Overdrive)
Tier
new
Inputs
1 x 1/4" instrument input, 3.5mm aux in
Finish
Hard-wearing black vinyl with steel corners
Category Source
detail
FX loop
Send and return
Product type
Bass amplifier head
Korena Special
false
EQ
3-band EQ (Bass ±12dB, Middle ±12dB with 4 switchable mid voicings, Treble ±12dB)
Dimensions (WxHxD)
15.63" (39.7 cm) x 7.64" (19.4 cm) x 8.58" (21.8 cm)
Weight
12.79 lbs (5.8 kg)
Handle
Top-mounted steel reinforced strap handle
Series
Digbeth Foundry
Country of origin
China
Product Type
Bass amplifier head
Model
DBF200H
Outputs
FX send/line out, balanced male XLR DI out (pre-EQ), speaker output (speakON® combi jack, minimum load 4 Ohm)
Source Id
site51500000465256
Limiter
None

Complete your setup

Worth comparing

More from Laney