Korena
Product detailSKU #1500000439636

MarkbassCMD TRAVELER 102 P V 2x10 300W Bass Combo Amp

Markbass
bluespopfunk rockalternativefunkjazz
Markbass CMD TRAVELER 102 P V 2x10 300W Bass Combo Amp
1/2

Independent shopping perspective

The Korena take

Markbass combines a 300W, 8-ohm bass combo with two 10-inch speakers in a vertical enclosure that keeps the controls at the front. Four-band EQ supplies separate low, low-mid, high-mid, and high adjustment, while the Flat/Scooped-Mid/FSW switch provides a faster route to alternate settings. The front-panel mute is useful for silent tuning or breaks. A rear reflex design, piezo tweeter, and bi-band limiter are part of the combo’s complete speaker-and-amplifier layout.

Markbass CMD TRAVELER 102 P V 2x10 300W Bass Combo Amp product detail
Product studyMarkbass CMD TRAVELER 102 P V 2x10 300W Bass Combo Amp

Strong match

Who this is for

  • Bass rigs that need a 2x10 combo with front-facing controls in a vertical cabinet format.
  • Silent tuning or between-song pauses using the dedicated front-panel mute switch.
  • Moving between Flat and Scooped-Mid settings from the three-way selector.

Consider the trade-offs

When to look elsewhere

  • Players who need the FSW switch position without using the optional footswitch described for that function.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

2 × 10-inch speakers; 400W RMS AES handling

The combo uses a pair of 10-inch bass drivers with the stated cabinet power-handling rating.

Detail 02

Four-band EQ with up to ±16dB adjustment

Allows boost or cut in low, low-mid, high-mid, and high frequency ranges.

Detail 03

3-way switch: Flat/Scooped-Mid/FSW

Selects the two named EQ modes or the footswitch position.

Detail 04

Rear reflex; piezo tweeter; 3.5kHz crossover

Identifies the cabinet port location, tweeter type, and crossover frequency.

Detail 05

12.99 × 17.04 × 27.40 inches; weight 34.17

The stated dimensions and weight describe the vertical combo enclosure.

Final check

Know before you order

  1. 01The combo is rated at 300W into 8 ohms.
  2. 02The FSW position is described for use with an optional footswitch.

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01How many speakers are in the CMD Traveler 102 P V?

It uses two 10-inch speakers and a piezo tweeter.

02Can I tune silently?

Yes. A front-panel mute switch is provided for silent tuning and breaks.

03What are the three-way switch settings?

The switch positions are Flat, Scooped-Mid, and FSW.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

5 detailsSound
Impedance
8 ohms
Frequency Response
40Hz to 18kHz
Speaker
2 x 10 inch
Crossover Frequency
3.5 kHz
Sensitivity
101 dB SPL
1 detailsPickups & controls
3 Way Switch
Flat/Scooped-Mid/FSW
1 detailsConnections & power
Speaker Power Handling
400W RMS (AES Standard)
4 detailsSize & weight
Weight
34.17
Depth
17.04 inch / 43.3 cm
Width
12.99 inch / 33 cm
Height
27.40 inch / 69.6 cm
2 detailsOther
Reflex
Rear
Tweeter
Piezo

Worth comparing

More from Markbass