Detail 01
.092 inch pickup width
Your saddle slot must be at least this wide. Narrower slots need routing before the pickup will seat.

Independent shopping perspective
An undersaddle pickup for acoustic guitars. For adding amplified output to an acoustic that currently has none.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Your saddle slot must be at least this wide. Narrower slots need routing before the pickup will seat.
Detail 02
The saddle sits this much higher once installed, so the saddle usually needs sanding to keep the action right.
Detail 03
Covers a standard six-string saddle. Check it against wider or unusual saddle spacing before ordering.
Detail 04
Onboard electronics need a battery. Output is stronger and less impedance-sensitive than a passive piezo.
Detail 05
Roughly a year of weekly gigs. Unplug the cable when not playing, since that is what switches many systems off.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Only if you are comfortable enlarging the endpin hole, checking saddle slot width, and sanding the saddle to reset action. Otherwise a luthier is the safer route.
About 1000 hours of playing on a single 9V. Unplugging your cable between sessions is what preserves it.
The pickup is .092 inch wide and 3.4 inches of active sensor. Measure your slot width and saddle length first — narrow slots need routing.
This is the pickup element itself. Pair it with an acoustic preamp or DI if you want tone control and a balanced output for the PA.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.