Detail 01
Looper: approximately 20 seconds maximum recording time
You can capture and replay a short stereo loop during playback.
Product detailSKU #1500000453231
KORGhandytraxx play Portable Record Player
1/5
Independent shopping perspective
The Korena take
KORG’s handytraxx play is a right-handed portable record player organized around hands-on scratch performance and live manipulation. Its crossfader channels can be swapped for reverse scratch operation, while three filter types and a built-in delay provide additional processing. The onboard looper records up to about 20 seconds, so a recorded passage can continue while you layer scratches, capture a sound, or change records. A belt-driven motor with digital rotation correction handles platter motion, and power is available from the included AC adapter or six AA batteries.
Strong match
Who this is for
- Right-handed DJs building scratch routines with a crossfader, filters, delay, and live looping.
- Keeping a recorded loop running while changing records or adding scratch layers.
- Portable record sessions powered from six AA batteries or the included AC adapter.
Consider the trade-offs
When to look elsewhere
- Left-handed setups, because the player’s specified orientation is right handed.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Crossfader channel swap
Swapping the channels enables reverse scratch operation.
Detail 03
Filters: FILTER1, FILTER2, FILTER3
Three filter modes are available in addition to OFF.
Detail 04
Stereo ceramic cartridge; MM supported
A stereo ceramic cartridge is included, and MM is supported.
Final check
Know before you order
- 01For battery use, supply six AA alkaline or nickel-metal hydride batteries.
- 02The specified control orientation is right handed.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the handytraxx play loop audio?
Yes. Its stereo looper has a maximum recording time of approximately 20 seconds.
02Can I reverse the crossfader channels?
Yes. The crossfader channels can be swapped for reverse scratch operation.
03What is included?
It includes an AC adapter, five replacement plugs, dust cover, slip mat, EP adapter, and Quick Start Guide.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsPickups & controls
- Phono Preamp Gain
- Standard value: 34.5dB; Equalizer characteristics: RIAA
1 detailsPlayability
- Orientation
- Right handed
1 detailsBody & build
- Color
- Gray
4 detailsConnections & power
- Power Consumption
- 2.35W
- Maximum Output Level
- LINE OUT: 2.3Vp, THD 1%; PHONO OUT: 300mV (1kHz, 5cm/sec)
- Power Supply
- AC adapter (included), six AA batteries (alkaline or nickel-metal hydride)
- Maximum Input Level
- AUX IN: 2.5Vp
3 detailsSize & weight
- Weight
- 5.07
- Dimensions Without Cover
- 14.57˝ x 11.02˝ x 3.30˝ (370 x 280 x 84 mm)
- Dimensions with Cover
- 14.57˝ x 11.26˝ x 3.43˝ (370 x 286 x 87 mm)
1 detailsIn the box
- Included Items
- AC adapter, AC adapter replacement plug (5 types), dust cover, slip mat, EP adapter, Quick Start Guide
11 detailsOther
- Crossfader
- 44.1kHz, 32-bit float, stereo
- S N Signal to Noise Ratio
- Less than 60dB (DIN-B)
- Looper
- 44.1kHz, 16-bit, stereo; max. recording time approx. 20 sec
- A D D A
- 44.1kHz @ 16-bit, stereo
- Drive Motor
- DC servo motor
- Drive System
- Belt-driven (with digital rotation correction)
- Rpm
- 33-1/3, 45, or 78 revolutions per minute
- Filter
- 44.1kHz, 32-bit float, stereo; types: OFF, FILTER1, FILTER2, FILTER3
- Delay
- 44.1kHz, 32-bit float, stereo; feedback (0%–80%), time (1,000ms–10ms)
- Cartridge Model
- Stereo ceramic cartridge included (MM supported)
- Mix
- 44.1kHz, 32-bit float, stereo
