Detail 01
880W peak Class-D amplification
The amplifier is built into the loudspeaker, with 580W allocated to LF and 300W to HF.
Product detailSKU #1500000477234
JBLSRX912M 12" 2-Way Powered Speaker
1/5
Independent shopping perspective
The Korena take
The SRX912M is a self-powered 12-inch, two-way point-source loudspeaker for main PA, stage-monitor, and front-fill duties. Its Differential Drive woofer, compression driver, and fixed 90° × 60° waveguide combine controlled coverage with output up to 133 dB peak. Onboard Class-D power and DSP keep configuration in the cabinet: adjust filters and delay from the rear LCD, or use its dual etherCON connections for Harman HControl networking. A 42° cabinet angle supports focused monitor placement, while six M10 points cover suspended deployments.
Strong match
Who this is for
- Stage-monitor positions where the cabinet’s 42° angle can aim sound toward the performer.
- Main PA or front-fill roles within an SRX900 loudspeaker system.
- Deployments needing onboard filter and delay adjustment from the speaker or networked control.
Consider the trade-offs
When to look elsewhere
- Installations that need the 90° × 60° coverage pattern to rotate; its dispersion is non-rotatable.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
24 adjustable filters and up to 2,000 ms delay
Provides onboard processing for configuring the speaker to a deployment.
Detail 03
Dual etherCON ports and Harman HControl
Supports network monitoring and configuration through the stated control protocol.
Detail 04
Six QuickLink M10 suspension points
Provides dedicated rigging locations for suspended placement.
Detail 05
45 lb. unit weight
The listed speaker weight is 45 lb.; shipping weight is 58 lb.
Final check
Know before you order
- 01Aim the enclosure deliberately: coverage is fixed at 90° horizontal by 60° vertical.
- 02For networked operation, use its two etherCON ports and Harman HControl control protocol.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the SRX912M be used as a stage monitor?
Yes. Its low-profile enclosure has a 42° monitor angle for focused performer coverage.
02What connections does it provide for audio?
It has balanced line-level input with two XLR input and output connectors.
03Can it be suspended?
Yes. The cabinet includes six JBL QuickLink M10 suspension points.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Frequency Response
- 60Hz–19kHz -3dB
- Frequency Range
- 50Hz–20kHz -10dB
2 detailsPickups & controls
- Controls
- LCD display encoder and back button
- Control Protocol
- Harman HControl
2 detailsBody & build
- Color
- Black RAL9005
- Cabinet Material
- Exterior grade birch plywood with Duraflex finish
11 detailsConnections & power
- Network Connectors
- 2 etherCON
- Voltage Range Limits
- 80V–260V 50Hz and 60Hz
- Peak Power
- 880W total, LF 580W, HF 300W
- Input Sensitivity
- +1dBu
- Voltage Range Nominal
- 100V–240V 50Hz and 60Hz
- Input Impedance
- 100 kohm
- Input Type
- Balanced line level
- Continuous Power
- 600W total, LF 400W, HF 200W
- Maximum Input Level
- +21dBu
- Power Connectors
- Dual Neutrik powerCON TRUE1 input and output
- Input Connectors
- 2 XLR in and out
5 detailsSize & weight
- Unit Dimensions
- 23.0 inch × 15.0 inch × 13.4 inch
- Weight
- 45
- Shipping Weight
- 58 lb.
- Bit Depth
- 24 bit
- Unit Weight
- 45 lb.
1 detailsIn the box
- Standby Current
- 0.2A at 100V 0.1A at 120V 208V and 240V
25 detailsOther
- Handles
- One integral handhold
- Environmental Rating
- IP54 IEC 60529 ASTM B117 and ASTM G155
- Peak Current
- 6.9A at 100V 7.0A at 120V 3.9A at 208V 3.5A at 240V
- Latency Monitor
- 2.9 ms
- Network Speed
- Dual 100Mbps ports
- Networking Type
- TCP IP
- Hf Driver
- 1 inch exit JBL 2408H 1 neodymium compression driver with 1.5 inch voice coil
- Continuous Current
- 1.7A at 100V 1.4A at 120V 0.9A at 208V 0.8A at 240V
- Inrush Current
- 1.8A at 100V 2.1A at 120V 3.7A at 208V 4.4A at 240V
- Latency Main Pa
- 7.1 ms
- Suspension
- Six JBL QuickLink M10 points
- Coverage
- 90º horizontal 60º vertical non rotatable
- Idle Current
- 0.3A at 100V and 120V 0.2A at 208V and 240V
- Accessories
- SRX912M loudspeaker, Neutrik NAC3F TRUE1 S connector and Neutrik NAC3M TRUE1 S connector
- Monitor Angle
- 42º
- Indicators
- Four LED indicators including bi color status LED
- Lf Driver
- 12 inch JBL 272F ferrite differential drive dual 2.0 inch voice coil
- SPL
- 133dB peak
- Product Type
- Powered loudspeaker
- Sample Rate
- 48kHz
- System Type
- Multi purpose point source two way powered
- Series
- SRX900
- Cooling
- Convection cooling with external aluminum heat sink and internal on demand fan
- Amp Type
- Class-D
- Grille
- 16 gauge powder coated steel with acoustically transparent cloth backing
