Detail 01
TRS on both ends
Carries a balanced mono signal or an unbalanced stereo one. What it does depends on the gear at each end.
Product detailSKU #1274034477590
HosaCSS-201 Dual TRS - TRS Patch Cable 6.6 ft.
Independent shopping perspective
The Korena take
A 6.6-foot pair of balanced 1/4-inch TRS cables joined for stereo or two-channel runs. For linking gear that already uses TRS jacks.
Strong match
Who this is for
- Connecting a mixer's TRS outputs to powered monitors or an interface
- Short balanced runs between rack gear on the same desk
- Stereo insert or send/return links inside a small setup
Consider the trade-offs
When to look elsewhere
- Anyone needing XLR ends — these are 1/4-inch on both sides
- Runs longer than about six feet; there is no slack
- Guitar-to-amp use, where an unbalanced instrument cable belongs
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Dual cable
Two conductors in one product, so a stereo pair is handled in a single purchase instead of two cables.
Detail 03
6.6 ft length
Desk-to-rack distance. Enough to reach across a table, not across a room.
Detail 04
Balanced wiring
Rejects hum picked up along the run, which matters near power supplies and dimmers.
Final check
Know before you order
- 01Check that both devices have TRS jacks, not TS or XLR
- 02No adapters included; the ends are fixed 1/4-inch
- 03Measure the actual path, including any routing behind a desk
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I use this as a guitar cable?
Not the right tool. Guitars use unbalanced TS jacks. A TRS cable into a TS input will still pass signal, but you gain nothing and lose the balanced benefit.
02Is this stereo or balanced mono?
Either, depending on the jacks. Plugged into balanced line gear it's a balanced mono pair. Plugged into stereo gear, each cable carries left or right unbalanced.
03Will this work for studio monitors?
Yes, if your monitors take 1/4-inch TRS inputs. Two cables cover a left and right pair from an interface or mixer.
04How long is it really?
6.6 feet, which is two meters. Plan for a little less once you account for bends and strain relief at each end.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
