Detail 01
10 inputs / 14 outputs
Provides ten input channels and fourteen output channels for routing through the rack.
Product detailSKU #1500000460297
HarrisonD510 10x14 Dante Interface Card for the D510r Rack (1G Ethernet)
Sale
1/2
Independent shopping perspective
The Korena take
Purpose-built for the D510r rack, this 10-input/14-output card brings installed 500 Series processing into a Dante AoIP workflow. Two RJ45 ports provide primary and secondary network connections, and the BNC TTL connection supports word-clock synchronization. It combines A/D and D/A conversion with sample-accurate synchronization and flexible routing across modules. With quoted latency of 0.9ms at 48kHz and 0.45ms at 96kHz, it suits studio, hybrid-studio, and live-sound signal paths where timing matters.
Strong match
Who this is for
- Routing processing in a D510r rack into a Dante-compatible studio or hybrid-studio system.
- Connecting D510r modules to a live-sound console through Dante AoIP.
- Using primary and secondary RJ45 connections in a Dante network.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
2 x RJ45 primary and secondary
Provides separate primary and secondary network connections.
Detail 03
BNC TTL word clock
Adds a dedicated word-clock connection for synchronization.
Detail 04
0 dBFS = +24dBu on channels 1–10; +18dBu on channels 11–14
The output reference level differs between the first ten outputs and outputs 11–14.
Final check
Know before you order
- 01It is designed for the Harrison D510r rack.
- 02Dante AoIP integration requires a Dante-compatible system.
- 03Use the BNC TTL connection when your setup requires word-clock synchronization.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How many audio channels does the card provide?
It provides 10 input channels and 14 output channels.
02Does it have redundant network connections?
It has two RJ45 ports identified as primary and secondary connections.
03What latency is quoted?
0.9ms at 48kHz and 0.45ms at 96kHz.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 20 Hz – 20 KHz +/- 0.25 dB
1 detailsPickups & controls
- Matrix Control
- Flexible routing across modules
3 detailsConnections & power
- Inputs and Outputs
- 10 inputs / 14 outputs
- D A Channel Output Levels
- 0 dBFS = +24dBu (channels 1-10) / +18dBu (channels 11-14)
- Network Ports
- 2 x RJ45 primary and secondary
7 detailsOther
- Audio Quality
- High-performance A/D & D/A converters
- Routing
- Seamless integration with Dante AoIP systems
- Efficiency
- Low latency transmission
- Audio Over Ip
- Connectivity for live sound and studio
- Precision
- Sample-accurate synchronization
- Word Clock
- BNC TTL
- Applications
- Live sound consoles and hybrid studio setups
