Detail 01
5/16-inch post hole
The peg uses a 5/16-inch post-hole specification.
Product detailSKU #1500000429937
GroverSta-Tite Dulcimer 870 Series Rosewood Button Tuning Peg Nickel
Independent shopping perspective
The Korena take
These nickel Sta-Tite 870 Series friction pegs pair rosewood buttons with a metal shank and two knurled bushings. Made for dulcimer or banjo, they offer fine string adjustment and are described as a lightweight, durable drop-in replacement. Fit is the central consideration: the pegs use a 5/16-inch post hole and accommodate headstocks from 11.11 mm to 15.8 mm wide. They also accept string gauges up to .074 inch.
Strong match
Who this is for
- Replacing existing dulcimer or banjo friction pegs within the listed headstock-width range.
- Dulcimer or banjo setups using strings no thicker than .074 inch.
Consider the trade-offs
When to look elsewhere
- Headstocks narrower than 11.11 mm or wider than 15.8 mm.
- Strings with gauges above .074 inch.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
11.11 mm to 15.8 mm headstock width
This is the listed headstock-width range for the pegs.
Detail 03
String gauges up to .074 inch
The pegs accommodate strings through .074 inch.
Final check
Know before you order
- 01Check that your headstock width falls between 11.11 mm and 15.8 mm.
- 02Confirm your setup uses a 5/16-inch post hole.
- 03Confirm string gauges do not exceed .074 inch.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What instruments are these pegs for?
They are friction pegs for dulcimer or banjo.
02What headstock width do they accommodate?
They accommodate headstocks from 11.11 mm to 15.8 mm wide.
03What is the maximum stated string gauge?
They accept string gauges up to .074 inch.
