Detail 01
10-foot length
Provides a fixed cable run for installations separating the antenna and receiver.
Product detailSKU #1500000278969
Electro-Voice10 foot, 50 ohm BNC coax cable
Independent shopping perspective
The Korena take
The Electro-Voice CXU10 is a pair of 10-foot, 50-ohm BNC-to-BNC coax cables for UHF wireless microphone systems. Its low-loss, low-attenuation design supports installations where the antenna and receiver need to be separated. The cables use RG-58U coax, have an estimated attenuation of 2.2 dB, and measure 0.195 inches (4.95 mm) in diameter.
Strong match
Who this is for
- UHF wireless microphone installations requiring a 10-foot separation between antenna and receiver locations.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
BNC to BNC; 50 ohms
Defines the connector type and impedance of this cable pair.
Detail 03
Estimated attenuation: 2.2 dB
Gives the listed attenuation figure for the cable.
Final check
Know before you order
- 01Confirm that the installation uses BNC connections and 50-ohm coaxial cable.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What does the CXU10 connect?
It is a BNC-to-BNC coax cable pair for UHF wireless microphone systems, intended for separation between antenna and receiver locations.
02How long are the CXU10 cables?
Each cable is 10 feet long.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Impedance
- 50 ohms
1 detailsBody & build
- Color
- Black
1 detailsConnections & power
- Connector Type
- BNC - BNC
1 detailsSize & weight
- Diameter
- 0.195” (4.95 mm)
2 detailsOther
- Estimated Attenuation
- 2.2 dB
- Cable Type
- Coaxial RG-58U
